Search results

Heres some pics which I took last night. Not gret of pics. I have 4 zones in total, Hot water, Ground, 1st and Loft Magnaclean for the boiler 300L Megaflow No isolating valves except for full bore which is connected to the water softner. stop cocks for pipe work going to 1st floor and...

Main stop cock which then goes into a pressure reducing valve set to 5. Max I get is 3 bar

Full picture of Megaflow

Just under 3bar pressure

Megaflow 300L

Magnaclean

Main water pipe comming in and going through the water softner

4 zones in total

Picture of all zones and magnaclean

Hi Simond Both are exactly the same, the cold and hot. Havent had a chance to take a pic. Redrained the system this morning removed one of the unessesary isolating valves. Refilled the megaflow and still the same, really disappointed. Both loft and the first floor are pretty much...

Thanks Guys Ive been looking into the Galaxy system which has narrowed it done for me. But the downside is theres so many models to choose from. Any chance you guys can advise me what a suitable model is for a domestic house. The items that I would be after is what Oasistechnical mentioned...

Hi Simon, No, no flow restrictions any were, as mentioned quite a few cock stocks for the closure of water for 1st floor and loft bathrooms. Where would i check for blockage and how. As both baths are effected, it must be before the pipe work splits one going to the loft and other to the...

Hi Simond Ive just rechecked it Definatley a 3 Litre bottle re-tested 3 times and I got 3.4, 3.8, 3.5 Should I now be worried....... Pressure guage showing be 2.9

It was definatley a 3 litre bottle. Ok let me test it again just to be sure.

Hi Oasistechnical, Ive searched for the alarms you recommended, the Texecon and the G2/G3 as well the Dimensions. I think Im now even more confused then ever with so many more options and the Honewell panels are really big. Are these for home use? Any chance you can put a quick list...

Hi Simond I carried out the test 3 times and the average was 3.3 seconds to fill a 3 litre bottle. First time I got 3.2, second, 3.5 and 3rd 3.2. I filled it from the water softner inlet 22mm pipe. This is placed just after the main stop cock and pressure guage. Re checked the pressure...

Hi John Thanks for getting back to me. Personally I would prefer a WIRED system Im not a big fan of Wireless even though I work in the field of IT. I cant seem to find a good wired system and everyone seems to be pointing to the above mentioned systems which are all wireless or part...

Any suggestions........ :roll: or are the above mentioned alrams not recommened at all.........

Good point Simond - in regards to the PRV and checking that. The good thing is the main pipe comes straight in to the side of the house so can check the dynamic flow rate there. Is it simply getting a litre bottle or bucket and timing the flow........so special equipment required. Also one...