Search results

So does that mean we all get a free 17th ed if we send ours back, or if you buy one now will it come with a part B, or if we hang on a few months will the current edition be updated mind you the 16th was reprinted about 4 times with god knows how many ammendments I mean who's kidding who here...

Some good ideas there chaps as to the phase I think as the lights go round the building they are fed from from different boards, right now this is where I am with this, and to complicate matters some are ELV maintained from the original part of the building on a battery bank, I have no idea how...

Yes an unswitched supply and a link to the maintained term as I said if you remove or somehow switch the link they go on non maintained some kind of photcell will work but it would be a hell of job on 30 odd lights suposse I could do them in groups maybe any ideas would be great Dev Maguire

I have been asked to look into the following a building has around the outside maintained emergency lighting I have been asked to have then go off in daytime and on at dusk. As you will know I cannot switch the live as this will bring on the battery back up I have thought about switching the...

Cheers denford I wonder, door contacts I have two sets to fit and no instructions there are two silver screws at the ends which are linked by a resistor? the other three are brass I assumed that when in contact with the magnet portion I would get continuity but alas no no continuity at all any...

Actually getting somewhere with this, however the strobe/bell seems to have a different wiring set up, the cont panel has two terminals per out but the bell a intellisenes AG6 has one term per function and no return there is a 12v supply neg and pos thats clear enough but as to the rest ?any...

Hi any possibility that you have the manual for the Avanti compact 8 Dev

hello again some more info managed to download some stuff on the last sheet there is a diagram which is easy enough but the text states the following rkp's are wired in parallel, tampers in series using six core, but surely the tampers are internally connected ?no ? or can you wire in more to...

Hi all bought an avanti compact 8 for a small shop but no install manual I bought this from alert electrical big big mistake, has any one got a copy they could scan and send me DM

Hi Its making a bit of sense now, is this amauter radio or CB or is CB considered to be the punk rock of am radio DM

Ihave the same car with the same proplem it is common I have heard and it is most likely the mass air flow meter it may not be at fault itself but a rubber pipe came off or perished DM

wtf is this post from the twilight zone???? :?

cheers mate, very informative, and well explained, I will have to check whats been fitted, but I have a suspicion that it will turn out to be a mixed bag as the existing are not all the same in appearance but cant tell by looking DM

How many 58W flu tubes constitute an need for a C type mcb, I am having a dispute with a company maintenance guy I say it is unnessecary to have a C type for 5 doubles (10 Tubes) As a matter of interest there is a D20 on a radial running a warm air extractor on a plug top ?? DM

Hi Andy the seaward software I use can be manipulated to do loads of stuff and I think your right about flagging up items due I dont bother as I just call up the site then location and scan visually items due, you can alter the freqency of testing from 6 months to 3 years (Ithink) As a matter...

rocky your dead right one runs the sauna, back at it tonight, another night shift :( stilll at least I get peace to turn the lot off and leave it off till Iam finished with it, more I&T on the bulk of the installation, lights Iwill leave till another day as it's going to be a shift in the loft...

If your company is going to pay for the kit software is a must for record keeping seward pat pro is the best as far as I am concerned. permanant id on equipment is a waste of time, new number each time is the is the way to go trust me forget barcoding also you will never ever stop...

Securespark can you suggest a supplier I have had a google but to be honest I am tending towards an all in kit but thats propbably not the best way DM

securespark, the one I have in mind is a honeywell TSpro1 although this might be a stock number with a optima compact G4 panel does this sound familiar to you. and I have just seen a ADE accentia mini 8 ?? This a seasonal shop of timber construct insurance wont look at it DM

Ricicle sorry I forgot your Q most of this is buried tiled over kitchen ring's are plastice face plate type most were smashed even the cable to the fryers are buried and behind stainless plating, hope they want bugger all moved but yes I will keep in mind the points you raised Cheers DM