Search results

So we’ve a straight run for the new kitchen, from an inspection chamber to a settlement rest bend (it gave us extra depth, to accomodate going under the foundation & to the depth of the inspection chamber invert) However the closest we could get the rest bend to the wall, leaves it 230mm away...

It's been many (rather nightmarish living-on-a-building-site) years with a 'temporary" drainage setup connecting to the shared sewer - we installed an IC in 2017 with an invert level of around 1.2m below external ground level. You can see one of my previous thread here where I was designing...

We are about to install a bathroom in a new location at the front of a Victorian terrace (to regain rear bedroom) & as such we will be running a new soil pipe. The plan is to chase it in to the wall slightly in the hallway downstairs, 'hiding' it within the lobby door lining design, using...

I am in the process of moving a bathroom from the rear 'outrigger' of a small victorian terraced house, to a section of the front bedroom. We are about to build the stud walls & since I plan to install a manifold setup for hot and cold water, I wanted to check what folks thought of this...

The original cracked/leaking clay drainage of the house has been disconnected and partially removed, with an inspection chamber installed as described in this thread (thank you to those who so kindly offered advise) We have temporary drainage set up & need to figure out the next step. This is...

After having discovered a broken 'buchan trap' that has been leaking for goodness how long (beginning to dig created an effectively open sewer / cesspit in our garden!) we have been dithering about design but have today decided to go ahead, disconnect all our foul water, remove the broken trap &...