Search results

dont worry - managed to find a list ! http://www.nationalgrid.com/NR/rdonlyres/5BF43F43-B1CA-41F8-8604-CB870F502700/5789/S000209.pdf Not sure if they all supply exactly the same thing

I have just phoned my local company who does this work and they have quoted me £390 to relocate my gas meter to an external box on the side of the house. They have said that this price includes the fitting of a surface mount box which stands out from the wall by 8 inches!! They did say that...

Does anyone know what size pipe the gas mains to my house will be ? Just that I would question the last comment of the boiler needing a deadicated 22mm pipe if the supply to the house is only 22mm then how can I supply anything else but the combi boiler !? Do you see what I mean ?

My current situation is as follows: a) In around Jan / Feb time I will be replacing my Combi Boiler with a Baxi Platinum as follows: http://www.baxi.co.uk/products/literature/Baxi_Platinum_Brochure.pdf b) All my gas work in the house is currently fed around the house via lead pipes c)...

Does anyone know where abouts I might be able to order White Gloss Melamine Veneer from ??

The hinges above

its ok - I have thought about all that and I have managed to find some hinges that work perfectly if I have 20mm doors. These are my hinges: http://www.woodfit.com/product_info.php?products_id=452&Name=Lay-on+Hinge+-+Unsprung+-+Bright+Zinc I am going to be fixing the hinges to the door...

I am going to be building some cupboards for the bathroom that I intend to have two doors on the front that I am going to tile with one 10mm x 300mm x 300mm tile on each door. The problem I have is that the total door thickness can only be a maximum of 20mm (due to the door hinges I am using)...

I have also found these on screwfixs web site that i could use either end: Male Iron Coupler Compression Fittings 15mm×½" http://www.screwfix.com/app/sfd/cat/pro.jsp?cId=100122&ts=05071&id=18515 Am I doing the right thing ?

Just been googling trying to work out how I am going to do this and wondered if I should get: one of these: BRASS EQUAL TEE 1/2 INCH BSP PARALLEL FEMALE THREAD 442PPF72810 from: http://www.chandleryworld.co.uk/acatalog/BrassEqualTeeFxFxF.html two of these - one each side of the tee...

I have just purchased a Crosswater Galaxy 3 Hole Basin Set GX130WNC as per: http://www.crosswater.co.uk/productsgalaxy.php The kit has arrived this morning and it basically consists of: 2 x hot and cold diverter taps, each with two brass female G1/2" screw fittings on each end 1 x...

I am currently in the process of building a frame for a bathroom cabinet that a sink will be sat on. I have a feeling that the final height of the sink is too high as when I measured it last night the height of the sink came to 92cm. Before its too late and I fit it (and now while its easy to...

i am just about to get my lead pipe replaced and all I did was to phone the local water board and get them to give me a few names of local companies that will do the work. I managed to find one company who is approved by the local water board and as such the local water board dont have to...

I am trying to find a bath mixer that can be used to control the output of two separate outputs: 1) A hidden bath filler on the overflow pipe as per: http://www.boundarybathrooms.co.uk/WebShop.aspx?ProductGroupDetail=313 2) A pull out shower down thing I would like to be able to choose...

I need to fit a number of those kitchen door brackets and wondered if there is a specialist router bit that I can use with my drill that will create a hole thats the exact size and depth needed for these types of brackets Anyone know what I mean / have any ideas ?? thanks in advance !

I have just had one of my bathroom walls plaster skimmed and I would now like to hang a large mirror (that I have yet to purchase) from this wall. The mirror will me about 1.5m x 1.0m in size and I don’t want to use screws or corner fixings as I want a very minimal look. Does anyone have any...

Just ordered both to see what they are like - nice one thanks!! God the internet is great for this kind of stuff. I have driven round miles all your usual DIY stores and found nothing - single post on here and a few helpful people and I found exactly what I wanted - brilliant!

yep i saw that one but it mentioned: so I didnt think that it would be any good. I have managed to find a company called southco (www.southco.com) which I think do what I am after

true but its not a very clean install. I am trying to do a very designer / modern / minimal install In the mean time I have managed to find some others but again, doesnt look like the temp can be controlled by the user: http://www.boundarybathrooms.co.uk/WebShop.aspx?Category=2663

Does anyone know anyone that sells a wall plate design infrared tap that the temperature can be changed as required? I have seen this one from grohe but it seems to be designed for commercial use and as such you can’t change the temperature: 36243 SD0...