Search results

I looks as though I'll have to do the job properly then :giggle: I think I was hoping for something dead easy, rather than starting over again with the cable sensor and drilling thro into the blocks. The TV cabinet and back board were made from scratch and there's only fours screws holding it...

Thank you for the replies I’ll study them and get back to you … Ray

Thank you I’ll study that later …

I've only ever used normal rawl plugs for fastening any thing to walls but on this occasion at my son's more modern house it would entail identifying the gas pipe and cable locations then using maybe 2" screws into the breeze block which seems over the top for 4 shelves that will only have small...

Thank you Harry I'll try that,

Thanks MP but as Harry says he kindly explained that earlier ... and while I'm here ... Q1. what is the purpose of the bulb being in the circuit ? and Q2. is the only way to reduce the voltage back to 2.7ish by connecting a bulb and waiting for it to go down? It's just that the torch worked...

Every time I’ve asked a question on here I’ve ended up with a solution … it will be a miracle if I manage it on this occasion. I’m trying to bring a Suprabeam Q7xr back to life. When the battery only had 2.78 volts the torch worked as it should high, medium, low output and flashing. Now...

I was going to mark this thread title as SOLVED but the option doesn't seem to be available. I'm happy with the battery charging now - thank you for the help - but need to have a new title related to the torch problem.

Also when the battery had only 2.78 volts and worked normally it would only do so for a few minutes, the light would go out and the battery voltage would be zero.

Every time I’ve asked a question on here I’ve ended up with a solution … it will be a miracle if I manage it on this occasion. I’m trying to bring a Suprabeam Q7xr back to life. When the battery only had 2.78 volts the torch worked as it should high, medium, low output and flashing. Now...

Thanks for that added information D Presented with the same problem and a spare key I can’t imagine failing to get it to fit. Ray

Have you found any keys of the correct size that go in but don’t turn ? If so I’d open the lock and change the position of the 3 levers randomly, you may be lucky and change the lock to fit the key

Thank you Harry ... I'll give it another try tomorrow

Having no idea how long it would take I held it on for 1 minute and the voltage went from zero to 2.84V so I tried it for a further 30 seconds ... it was still 2.84V ... I repeated the 30 secs it remained at 2.84V Tried it in the 1000 lumens torch and it lights up OK Turned the torch on and...

Thank you Harry

Thank you Harry ... I just need to check I have understood correctly And, is it OK to put the tester across the battery while its transferring power?

I don't think Silicon sealer adheres to anything wet ... it may be worth opening a closing it a few times if you haven't already. Ray

I have a flat Re-chargeable 26650 Li-ion Battery 3.7v 5000nAh 18.5Wh and no charger. It had 2.78 volts and was lighting a torch yesterday ... it now reads 0.00V on a digital meter. I wondered if I have something in the house to make one just to check if it will charge. If so I can send for a...

If you have a similar window in working order you’ll be able to determine the wire shape needed and have a practice un-latching it. Ray

Started machine on 30 degrees this morning. It went off after a minute or so ... ALL the lights out as usual. Turned my attention to the power supply. Run an extension cable from the house to the washhouse and the machine worked perfectly. Checked the 13amp socket with a tester and found it...