Search results

Does a worcester 24cdi RSF require compartment ventilation? I can't seem to find my booklet anywhere

Sound like the pressure vessel is knackered. Feel the prv pipe see if it gets warm or find where it terminates outside i bet it is wet.

Grundfos 15-50 will do it

Hi everyone, I've had a japenese acer for 3 years not in a pot but straight in the ground. Every year since I bought it, it has got bigger and better until this year it just looks dead. There is no fresh shoots visible. Should I just leave it or is it dead. Or can i do something for it. I can...

did you check the fuse on the pcb? If that is ok then definetly pcb. Try ebay get one for about £70 part no 174486

Did the person who serviced mess about with the gas valve, if so it could be gas valve settings (gas/air mixture) so may need analysing again and setting correctly. Other than that check electrodes and then replace gas valve.

should be no complications with a sealed system mate. Drain down, change valves , refill & remove air. Piece of cake. Get another quote

Is there only 1 type of pva bond if not which is the best?

I would have to change it but if the leaks not that bad you could try fernox leak sealer.

My full kitchen is tiled and I am now wanting it plastered. A plasterer has been and said he can unibond the wall and re-skim. Another plasterer said all tiles need to be took off or dot and dab. Can any one help me here please. Which is the better option?

only problems i'v had on them is air pressure switch, pcb and pumps But a pump would not cause this fault so go for the other 2

It is really best to drain down first but does depend on type of system and size of pipework. Eg if its a pressurised system then drain down is a must. If it's tank fed system and 8mm pipe then it's possible to do live or bung the tank to cause an airlock. How much are they charging you?

My neighbour has had a wall made in his garden last week and now patches of white flaky stuff is appearing and as I drive round my estate I can see the same on most walls. I am looking to have a wall built soon and I do not want the same to happen. Can any one tell me what it is and if so can...

I want the wall about 3ft high and will be about 3 paving slabs away from the road. Cheers

Hi everyone I have a Small shabby concrete path in my garden where i come out of my back door and go onto my decking. Now what I am wanting to do is pave this area. Is it best to break all the concrete up then put my paving down or pave straight on the concrete? And how do i do it dry mix or...

I'm not actually wanting to tee off any radiators, I'm wanting to reduce the pipework size so I can chase it into the wall. But I want to do it to 3 radiators and re-plaster.

I am wanting to build a garden wall to the front of my house. Do i need permission and how deep do the footings have to be?

I am wanting to do the exact same in my house only I want to do it to 3 radiators. Now would all 3 still get hot in 10mm?

I'm after some cd roms with domestic boiler instructions on. Where can I get some from?

most probably be the pump mate