Search results

Sounds like a thermistor problem. You got a manual?

Ace or ace high?

Ask the service engineer to take a look at it. If he`s a reasonable bloke he won`t mind. Maybe he dumped the water out the boiler through the prv to service it, and a bit of sludge is not allowing it to seat correctly. Or maybe, because it`s a biasi, the clock is a wind up one! :lol:

If i owned one, i`d kill myself! :roll:

It certainly won`t be behind the cover. Look at your user manual and it will tell you. How did you know how much pressure you were putting in before?

What`s the reading on the pressure guage, you say you kept topping it up every couple of days.

Not very many of these combis about. Only ever come across one before. Obviously didn`t sell well. So you`ve nothing at all? Does the pump start? Fan turn? What happens noise wise when you turn the hot tap on?

I guess you`ve no instruction manuals with the boiler?

A very valid point. Now that certainly would open a can of worms! So when a person is stood in the dock on trial, his argument would solely be that he recieved no payment for the work he carried out. Case dismissed? :?

So if it`s not illegal to perform gas work without monetary reward, could a landlord do his own safety cert? Mr systems i wait with baited breath!

Auto bypass is fitted on the boiler on the greenstar 35, apparantley the 35 can get the primary flow temperature above what certain makes of trv can handle. this makes a very distinctive noise. Read the manual for the boiler, i seem to remember that you can reduce the maximum primary flow...

On a personal note, if i`d have installed the boiler and the rads were not working, i`d have staid and found out why. And 2 powerflushes kind of shows lack of belief in the first one. The installer should have at least tried to get to the root of the problem, not took the money and left it up to...

:roll: Are we there yet? :roll: I really don`t care, i`m not a diy`er, and better still, i get paid for it! :lol:

When you click the cylinder stat off, check that the zone valve for the coil closes.

Sounds like you`ve an air lock in the coil. You no air bleeds near the inlet to the cylinder?

Yes i agree their back up is good, i`ve been to the factory on numerous occasions, they`ll test a suspect part free of charge at their site in morley. I still hate them, my opinion, and that of at least 7 customers whos ravenheats now live at morley waste traders. Anyone heard the ad on the...

Who decides who is competent? IMO anyone hanging one of those on their wall is as far from competent as you can possibly get. Manufacturers would love it as a get out clause for rescinding your guarantee.

Get your installer back to sort it. I install alot of the 831s and it should kick ass on your heating! Congratulations on your choice of boiler, can`t say the same for your installer.

http://www.vokera.co.uk/download2.asp?filename=excell_80e_96e_users_instructions.pdf

:shock: :shock: :shock: It`s outside? No wonder it don`t work right! Must be five below outside, you sure your pipes aren`t frozen up, that would result in a blockage :!: