Search results

I have a cable from door/window combination from before extending. One cable came to the window location and that went to magnetic contact in widow and from there to magnetic contact in nearby door. I plan to extend this cable to the bifold door location and daisy chain contacts for the doors as...

They not yet delivered. It something like this but main traffic door is door 2 so that opens before door 1.

On bifold doors what type and where is the best place to position the alarm contacts? It is a 4 door confusion. Door 2 is master and bifolds onto 3 and 4, door 1 can be opened when master is opened. Hope this makes sense.

I just noticed in my Wintex that under ZONE WIRING the PIR zone is set to 2K2/4K7/(6K8) and not as EOL. Does this have any significance?

Ok many thanks. One more question. Is it possible to extend an existing alarm cable with a terminal block? I mean EOL PIR and Bellbox

So is it done on a daisy chain, i.e just connect mirror cable to the one on which I am piggybacking from, or more complicated?

But will that help if no spare zones?

Thanks. Unfortunately no spare zones. Surprised that the installer told me wouldn't be a problem to add.

Elite 24

How can I check? The installer did tell me that it wouldn't be a problem to add another sensor from the existing. Does this photo show eol or double .pole?

I want to add a PIR sensor to the same zone where there is an existing one. Can this be done by just connecting a cable to the contacts of existing one and mirroring it into new PIR?

Thanks alot for this. UFH is an issue because we would need to get a new feed to boiler through house and not economic as boiler in loft. Electric UFH is supposed to be much more expensive to run. Kitchen is existing with cabinets both sides so only space is where currently positioned fig1...

Unfortunately UFH not an option. Can anyone advise?

Really need some experienced advice please. Sorry a bit long but want to include all details that may be relevant. We are doing an extension. We are short on space for radiators. We would like to use high output vertical ones but would like to get advice please on placement. Before extension...

We are looking to install heating to our 6m X 6m X 2.8h extension. We have an issue with space. 3 exposed walls and approx 16m2 of window (patio doors and roof windows). Walls roof and floor are well insulated. I have tried different online BTU calculators and have come up with wildly different...

Ok, very much appreciated. PIR is on same zone as another PIR and I rather not disable whole zone. Is it reasonable to just use another piece of alarm cable and twist the correct colour to correct colour and reconnect it allowing to hang in a safe space? or perhaps electric connector block.

Incase it helps; this is the model info on cover:

Sorry I dont seem to have as many cables as you mentioned - or are there more behind the facia? Which of these wires would I twist together? I can see Yellow = Tamper Blue = Alarm Red = 12 V Black = cant see...

If not staying in situ can I disconnect PIR and just twist cables or are they differently connected/wired for tamper?

Great very much appreciated. Would twisting also work for PIR?