Search results

Daft question Unless you are in a cold house and notice the steam, how else would you know the water is hot? :? I dont tend to stick my elbow in the pan to see if the water is luke-warm or not..... :roll:

The C4 Grand Picasso makes good sense over the C8 (Basically a van design used as a people mover). Has excellent detailing and interior compared with Renault Megane See C4owners.org or search C4owners on Google will highlight the pros (and cons) of the C4 Grand Picasso....supply and deliver...

Common fault on modern fords (2000's) Either Throttle Posistion Sensor is duff or speed sensor is duff or both. One looks at the other to determin/adjust engine speed. If the throttle is closed and the duff speed sensor thinks its moving it raises the engine speed. Happened both on my...

Check your DPC or your threshold strip

Its not difficult just one of those jobs that requires a "sweet spot" for it to all fall into place... You need nothing more than a screwdriver. if you have electric windows dont just walk away with the door panel though as you will tear all the switch wiring out of the car.

Disagree... :D Common fault on the Zetec Fords. Gear stick selector spring broken, circa 0.90p from dealer 20min job to sort. All you need is Screwdriver and Grease. Ford will charge you circa £140 to replace Lift up gaitor, undo screws to get into Ball and Socket. Detach selector...

You also need to take out the screws from around the door bin area along the sill line. The surround to the handle will come out and the door panel will negotiate around the handle...the handle stays in situ - it does not need to come off. The rubber strip will along the top will pop out...

It will need to go to Peugeot to be re enabled. About 30squids

with a tail wind

If you go through and get flashed once this is the camera performing self test. happens even if you go through below the limit. Two flashes are a recorded image. As mentioned takes two images and will be quite clear who is speeding. Gatso cameras work on film however these are now being...

Bob...? whats with you talking all "street" now or have you lost your hand eye coordination?

Way back in my spudent days I worked for Halfords, which at the time was part of the Boots Group. They offered a staff advice line for all matters relating to pay disputes and grievance issues. Although operated by Boots it was supposed to be impartial and 100% confidential. Might be...

I have managed to at some point snag the side bolster of the drivers seat with something sharp-ish (thinking rivets on jeans) and have torn/snagged the Vinyl/Leather covering on the exposed edge. The damage is approx 40mm long by 3mm wide and is right next to a seam with an Alcantera/Suede...

Well done Brains... What a useful contribution.

This is a known fault on the Foci. Road Salt and crud works its way in to the bonnet locking mechanism. Once you do get it open keep well lubed and try and keep the crud out.

Amorall looks great on application but after a few rain showers it starts to run and leaves a ghosting on the paintwork. I'd recommend a couple of applications of the Auto Glym Bumper Care and should last a good time.

Might be worth bearing in mind having a chat woth someone who has done this in a Picasso. Some Citroens rely on the OEM stereo to operate things like the reverse sensors and display functions, so removing may disable such functions. Perhaps having a chat with a "stealer" before purchase just...

Daft Question do you have the filter/s pluged in and at the right locations? I'm certainly no expert in this but hope this helps... We had this problem and took three visits from an engineer to sort. We also had this problem when people called in, the tinternet disconected. Final...

Once posted, I re-read the OP and realised it was a domestic-extension :oops: ...apologies. Still no harm in keeping good reacords.

There is more to good Project Management than just selecting the right contract... :D You will also need to understand the project in terms of... Schedule - what is being done when by who and ensure contractors know their timescales for completion. Also line up following trades with as...