Search results

no ( we must of posted seconds apart lol )

just a thought wouldn't the pressure gague be going down if i had a leak ?

no no hissing at all just a dripping sound just after flame finishes, but no water found yet

Ive got a baxi 105e everytime the flame cuts out you can hear a sound like water dripping but there isnt any water dripping from the boiler . Is this just the metal cooling down or should i phone a boiler guy ?

yes it is

p.s i have microbore upstairs could this cause the problem ?

yes i think so

I have one radiator that went off a few years ago and someone on here told me to turn all the rest of the rads off then they would start the other one heating up . This worked well but the problem has came back and now it seems im doing it every month , do i need a new radiator ?

screetch just 1 tube ? (3 bedroom house ) everything works ok, my service guy just checks the boiler feels the rads and says its all good £50 please lol

What number gets rid of sludge ? 1) Thermostatic Radiator Valves sticking shut. 2 )How to balance a CH system 3 ) Motorised Valve Failure 4) Central Heating Guide. 5) How to flush a heating system with mains water. 6) Refilling a sealed system 7) Repressurising the Pressure Vessel...

is it hard to do yourself ?

Can you get stuff that you can squirt into your radiators to get rid of sludge ? should you use a corgi man for this or could you do it legaly yourself ?

whats the lockshield ?

Hi ive got a rad thats hot on 1 side but cold on the other and ideas ?

I have a baxi 105e that some times turns itself off when it knocks the fan off, after heating to its temperature.Then restarts a few seconds later . This will only happen a few times a day . My boiler man says it will be ok but hes not the one who will be cold for a few days if it brakes at...

Hi every so often when im on the internet i get a (microsoft internet explorer has a problem and must close ) message. I opened it and found it was kernel32.dll (this means nothing to me :roll: ). Does anyone know how to fix it ?

thanks mate , not that its stopped yet but its started acting itself ( after you've been in the shower then put the ch on it just runs the pump only no ignition until its reset or turned off and on again :( )

Hi can anyone tell me where is the cheapest place to buy a baxi 105e pcb ?

i think your only looking at 1 hours labour to replace a gas valve and maybe a call out fee , probs around£180ish

Gaz stick a short vid on utube and il tell you what i think , this must be a first for diynot lol