Search results

Could be multitude of reasons, given the limited information, could be the wiring centre not wired properly. If trv's all met their respective temps the boiler should shut down and maybe the pump over-run not set right... or pump set at wrong speed...

Hi all, OK, you haven't read the rules on how to post on here fella. We need make, model, type of appliance and how old it is. Going off your limited information, could be the expansion vessel (EV) is defective, or the pipe/flex pipe that goes to the EV. Anyone worked on the appliance...

Hi all, Yeap :wink: pump ok, if you want to check drain down, and see if back of pump free from debris. Also, check condition of water in system fella...

Hi all, OK, firstly, the "plumber" obviously hasn't installed it correctly :roll: Secondly, what guarantees will you get when the RGI comes and puts his mark of zorro on the paperwork? He will more than likely just do a couple of checks and fill out your warranty and register the boiler...

Hi all, OK, if you are unable to take the cover off, I suggest you try and phone round for a RGI :roll: Safety is paramount in our field. You might hurt yourself, or do more damage than good. There are guys who would come out, unfortunately, they may charge more than a usual hourly...

Hi all, The Ohms test is for the pump, approx you need 180 across Live and Neutral to test the pump :wink: Turn rad down in the room where stat is and crank up the temp on the boiler :roll: Remember, the outside temperature of late is colder than normal, therefore, you need to adjust...

Hi all, Make sure you get a "GasSafeRegister" gas engineer, NOT, a plumber. And when you call him, before he comes out, ask if he specialises in WB boilers. So, you don't have to pay him to say; "I don't work on this type much!" :wink: After he walks up your drive and asks for a callout...

Hi all, Does your boiler (No info on which one!) shut down when the flow pipe gets hot? What temperature setting do you have on the boiler? Do you have a room stat fitted? Or run off boiler stat? The pump needs to be checked! If the problem is progressively getting worse, then, the pump...

Hi all, Your flame rectification is not working, by the information you are giving us. Physical check isn't sufficient, the need for a multimeter is in order :wink: Suggest you find a local RGI...

Hi all, Not familiar with warrington, try the gassaferegister website. Type in your post code and get some RGI's within a 5 mile radius, ring them up and ask specifically if they work on the Ideal Isar :wink:

Hi all, I take from your scathing comments about a local heating company that you don't trust an RGI :roll: Firstly, messing inside your boiler is dangerous and obviously you have no idea what work is involved to fix it! Secondly, only suitably qualified and experienced RGI's can resolve...

Hi all, Could be your underfloor heating is suffering from osmosis. Have you set the CH temp above 60 Degrees? Also, the type of pipe can be of detriment to your system. Also, someone could of put a nail through the underfloor pipework :roll:

Hi Kev, Cheers mate, you are a star as usual :D

Hi all, Anyone got a copy of the a/m MI's please on the PC/Laptop? Going to one in the morning :wink: No doubt, no paperwork on this old boiler, client only been in 3 yrs.... Cheers in anticipation...

Hi all, One solution, is to replace the whole stack in plastic. If you feel that the height is unsafe, go to HSS or Lord hire centres for a cherry picker or some scaffolding....

May I suggest you picking up the local yellow pages then. I am sure they have changed in the last 30 years :wink: You will get a local suitably qualified tradesman to supply and fit you heating system. Alas, your mindset is 30yrs out of date. Oil, Gas, or Dual Fuel no diy'er can "Install"...

Hi all, 15mm is the normal size for what you (the registered gas enginner) is installing. A second stage regulator will be on the outside wall. I would reiterate what tony commented on, and ask why not go for full LPG Central Heating as well :wink: To be fair, the size of pipe work...

Hi Kirkgas, I apologise, and stand corrected, this topic could probably go on and on... The letter of the law and it's interpretation can be quite complex, two barristers slugging it out in court will have their side and point of view on what they perceive the law to mean and quote...

Hu all, A very interesting and controversial situation faced by both parties. Although I am an RGI, I agree with woody, the tenant cannot be just cut-off because a CP12 hasn't been done. As stated by another RGI one tenant got compensation for the coucil/landlords actions, not fair, but...

Ok undo the front panel scres remove the big front panel above. to the right of the pump behind is a white tap attched to that is a small drain point. Close the cold feed and heating flow and return taps under the boiler. Put a sutiable container under the drain point and drain down till...