Search results

I have just had the Glow Worm Ultracom2 30CXI installed, and have added a Climapro2 RF Roomstat and an outdoor sensor to it. Boiler seems very good, very quiet when running, good supply of hot water, not tested the heating in anger yet as it is still too warm outside.

Thanks for all the replies and info, our stat is in the hall (if it is returned to its holder) and I'll set our temps as you have suggested and will see how we go.

We have just had our boiler changed and the new boiler has a programmable thermostat fitted, we have thermostatic valves on all our radiators. So I'm after some advice, I can now program temperature as well as on/off times for the heating, so is it better to have the heating running 24/7 but...

Some info on here:- Understanding downgrade rights http://www.microsoft.com/oem/en/licensing/sblicensing/pages/downgrade_rights.aspx#fbid=jl--Vg8UPLK Downgrade rights details and FAQ...

Well predicted, took nearly 3 hours.....

Been told that rebuild kits are not available for the valve. So its a replace the valve or the whole boiler choice :D

Our Glow-worm Betacom 30 has started to leak from the diverter valve, the boiler is 7 years old and a replacement valve is £200. So the question is would you replace the diverter valve or replace the boiler?

What do you have on the outlet of the compressor? If it is a quick disconnect, it maybe that that is leaking, remove it and replace with a blanking plug and re-test. It may help to strip all joints, clean and re-make using loctite (or similar), as this seals better than PTFE.

Hiya, You may find someone on here http://www.migweb.co.uk/forums/ who has already tried it.

If you are still unhappy with the suction, book a service with Dyson, it is fixed price, so they replace everything that needs doing for the one price, we get our done every couple of years, well worth the money.

I used to use an Agema to survey electrical installations, was a good piece of kit, could inspect in real time and capture stills for the reports, what are you hoping to do with it?

If you fit an isolating transformer before the inverter it will stop the nuisance tripping.

Are you sure that fireplace is suitable for a solid fuel fire? What used to be installed in the fireplace?

Hi, If you want to create your own tubes from sheet metal, then one of these would be useful http://www.ebay.co.uk/itm/SHEET-METAL-ROLLER-bender-former-shaper-plans-4-sets-/180939862559?pt=UK_BOI_Metalworking_Milling_Welding_Metalworking_Supplies_ET&hash=item2a20db321f#ht_1936wt_1185 It...

Cheers, that's pretty much what I was expecting.

Hi, I am taking out our old fireplace and having a new one installed with an inset multifuel stove in it, I am in the process of getting the fireplace prepared for the installers and have come across this Love the way that a piece of carpet gripper has been used in the earlier mods. and...

There is very little you can do, at one company I worked for they got van safes for the power tools and bolted these to the floor, the thieves broke in and crowbarred the safe from the floor, then we welded the safe to the floor, the thieves then took the van and opened the safe with a disc...

Already out there, remote starting or block heaters

I was always told if you are getting a new accountant ask them what 2 + 2 equals... The best accountant will answer "What would you like it to equal"

That's a bit of a sweeping statement......