Search results

I had an MOT on my car on May 21 2010. Advisory items: 1. Advise O/S/F Wishbone Bush Perished and cracking (May get worse) 2. Advise very slight play in o/s/f antirollbar drop link knuckle (may get worse). I want to replace these items as soon as possible. I will use a local garage...

There can be two cause for this: 1. Operating system is corrupt 2. Hard disk is faulty. In most of the cases it is the operating system . Try to restore the operating system. If you can not restore operating system then replace the hard disk and install operating system again. Nothing...

Software faults may cause this. Restore the netbook to original state by using usb memory stick. Use the DVD to make a memory stick (needs at least 2 GB). Use a PC to prepare the memory stick. If you have an external DVDROM drive you don't need memory stick. Just use the DVD to restore the...

I have taken the image of the location of the coolant temp sender. http://www.diynot.com/network/su966/albums/6030/24577 VW part numbers are as follows: 1. Temp sender: V06A919501A 2. O-Ring: VN90316802 3. Retaining Spring: V032121142 Last night I cleared all the fault codes. This evening...

Today I bought a sensor from VW dealer in Birmingham. It cost me £35. I think it is expensive compared to ebay. Someone has helped me to fit it. I now know where it is. I will take a picture of the location of the sensor. It is a 2 pin sensor and black(or ash) color as opposed to green and blue...

I have uploaded an image of airpipe. http://www.diynot.com/network/su966/albums/6030/24487 I have marked the image with an elliptical line where it was disconnected. I have uploaded some other pictures in the album. If anybody can point out where the ect sensor is will be very helpful. I...

While taking picture of the car engine I discovered that a pipe (like a hoover pipe) is open. It looks like a air pipe. What it does I do not know. It is connected from the engine to the front of the car. There is a socket where the pipe is connected. For some unknown reason it is disconnected...

You can logon to router to reconfigure it. First of all connect your computer to the router. Turn on router. On the router you will find some information as follows: ip address: For example 192.168.1.1 (may be different for your router) username: For example admin password: For example...

Hi SetNova, I have uploaded a new picture in the above link. I believe this is the ect sensor. It is in quite complicated place. Please confirm. Regards, Su

Hi, If there is anybody in Birmingham area who can repair my car please let me know. I live in West Bromwich area.

Here are some pictures of car engine near coolant refill area. http://www.diynot.com/network/su966/albums/6030 Could you please check which part is temperature sender. Thanks in advance.

I have bought a lead from ebay. I have installed the driver and installed the unregistered version of VPCS Lite software. This is the first time I have used the software in my laptop. It found few faults. I do not have understanding of these fault codes. If anybody knows the meanings please let...

My Polo started giving trouble about two years ago. Engine light came on. I took it to main dealer. They repaired it. But after few months it came back again. I have taken the car to dealer 4 times for this reason. They repair it and then the light comes back on again. Now a days it struggles...

Dear namsag, You are right. Myson makes 540mm (length) X 530mm (height). May be this is the item I am looking for. Will look for a distributor in Birmingham. Thanks SU

I have a radiator of uncommon size. Length: 550mm X height : 530mm. Thickness 17mm. Single. I want to replace it. I can not find a radiator of this size. If anybody can give me a company name where I can buy this radiator will be very helpful. Thanks in advance.

My Central heating is working again. I changed the solenoid and it started working again. Many thanks to namsag.

Hi Namsag, It seems you always contribute to solve problems. I have read the forum and found that you have contributed many times to solve problems. My solenoid will arrive tomorrow. I will attach the solenoid and see if it starts the boiler. As per your suggestion I have taken out the L...

My one is open vented system. There is a valve near the motor. It is normally set to automatic. To refill you will have to pull the lever to the right to manual. This is normally called mid position actuator. I can only explain what is mine. There are three small switches on the actuator. On the...

I had the similar problem with my system. I put the actuator valve in manual position to refill. The noise went away. The water in the system is not enough. There is air trapped. Bleed the radiators. And refill the system properly. Your problem may be diffrrent but it worked for me.