Search results

The above machine is showing the following error lights: Stain Removal light - Green flashing Extra Rinse - Green Flashing Door lock - Red Flashing Any ideas what it could be?

Where can i get a supply only price from? Ive saerched the net, but with no luck. Im based in West Sussex. The base is 5m x 2.3m

Ive only ever done one wall job like this, We used the metal c track system. Top and bottom plate, then 600mm centers, Resiliant bars, with soundproof insulation, then two layers of blue boards,Skim.

Sounds like a right bodge job. Find a local metal workshop, give them the measurement of the plate, Get them to cut you some stainless sheet and get them to drill the tap holes in it. Silicone it onto the bath. Will probably look crap.

A heat pump is a air conditioning unit that can supply heating and cooling. (Which most do these day's) The Air con unit has many different modes. Firstly it can be set at a desired temperature and the unit will use heating and cooling to maintain that set temperature. Cooling mode - This...

Im not sure what the question is. Building control have already answered it. There is no cavity wall, so it will need 50mm Celotex. then plasterboarding. Or build a inner cource of brickwork with thermalite bricks, but this would still need insulation behind and then plasterboarding over...

Heat pump air conditioning with a additional dehumidifier.

Thank you. Wasnt sure if it would damage the plastic thread in the socket.

I have a 1/2" BSP brass fitting (male) that is going to be screwed into a 1/2" BSP plastic socket (female). Do i need and PTFE or paste?

Thanks. The customer has decided she wants rid of the lead and replace the coping stones. Who am I to disagree. Is there a good product I could coat the coping stones in to stop the being so pourus.

Free advice and free lead. Can't be bad. Thanks guy's. I had a feeling it was salts or iron etc The battern under the lead could be a good temporary option. However i feel it could be time to change the coping stones, its just a decision whether to remove the lead or not. Whats the...

I have been asked to look at a couple of walls which have heavy staining and some paint pealing. There are run marks coming from above the lead. The painter has had a specialist from the paint manufacture come out to look at it and they have come to the decision that the moisture in the...

Anyone?

So firstly how do i find out if i have 1/2" valve or 3/4" valve. And im assuming the pressure is the hot/cold water flowing through the boiler. The current boiler is a Halstead Ace High. How do i test this?

Ok, Im trying to sort out a few plumbing/heating issues within my house. Im getting a new boiler fitted in the next couple of weeks. Still not decided on which one but looking towards the Remeha Advanta 35c ( see seperate post) http://www.diynot.com/forums/viewtopic.php?t=236108 Another...