Search results

If you have done the reset and still getting a voltage from D & B then yes its a faulty panel.

It looks like an SA2 go to there website there will be a manual there

soz joe you wont get one of them in there a 1.2 ah will fit.

Alarm. its an old optima 6 zone badged as response

you need to setup program 2 or 3 for your arm procedure, just remember to program an exit mode. [/u]

if you have the TAMP & TA linked out it must be the keypads. if you push the cover on the keypads do you hear a click, if yes then you need to stretch the spring inside the keypad. Red :wink:

put the siren into service mode, you then need to hold the learn button untill you get 2 long beeps, then put switch number five to the opposite position, you can then programme to the panel. 8)

Hi Cheds You must programme an exit mode to programme 2 in order for it to work, if you dont it will always revert to programme 1 ie full arm when you arm it. hope this helps

Sounds like you have blown the AUX fuse in the control panel.

hi alarm its a bug on the software trust me it works.

am i right in saying you are only using 1 zone, if yes then try this, put a link in zone 2 and set all other zones as unused. the control panel needs to see 2 active zones, it wont work with 1 zone connected only. hope this helps

as above. the red light wont flash itll be on all the time, if it goes out you have a tamper fault

yep all the SL & SK are compatible you just change the siren to work as a siren then prog all sensors to the panel

yep ur right but a control panel is the same price as a sounder plus he then has zoning capability, lot more oomff for the price me thinks

An SL3 control panel from the manufacturers will give you an internal panel with siren and all functions.

your fuse for the keypad in the main CP is blown :)