Search results

Hi I have the above car which I put a new battery in it last night. Now the car has not been run for 8 mths because of the battery issue. Started first time, but the driver door lock never worked and now the passenger door lock is faulty where you put the key in. Is it easy the change the...

Hi everyone, I had a chart on the back of the van which I used for picking oil nozzles. nozzle size up the left, pressure in bar along the top and the kw in the chart. As my van has now eaton the paper, has anyone got a spare copy or know where to find one.

Anyone know where to get some cheap. I have lost two this year and am not very happy. I got the last ones for £16 off ebay but cant find any that price.

I currently have a electric redring shower which is on its last legs as the shower does not have very much blast so the other half wants me to put in a new shower. My questions are If I was to put a thermostatic mixing shower running off the combi is it much cheaper than a electric shower .

YES I WOULD KEEP IT I WISH MY ELECTRICITY BILL WAS 85 A mounth

I have never used ptfe on a new fitting, but sometimes if a old one weeps when I redo it up I put a large smear of paste on it and sorted. But never PTFE. I go to jobs and see ptfe on them and think why ! The olive seals the joint not ptfe.

I cant see why that is a problem to have the both of them in a cupboard, have seen plenty of them, if in dout look in your MI

Whats the silver sheeting called that you put behind rads to deflect heat from the wall and where do you get them ? Thanks

gas PIPE SLEEVE with plastic pipe thats a no no.

http://www.screwfix.com/prods/75136/Plumbing/Toilet-Fittings/Armitage-Shanks-8-5-Bottom-Inlet-Fill-Valve

Check the filter on the Hot side you will need to isolate water and remove valve to check filter

we replace quite a lot of these and we never open them. They useally leak from the outlet connector on unit or from under the lid part on side. I would imaging it that if you opened it to clean the float sensor or whatever it would never seal right. Just keep using it till it leaks or packs up...

I got a very nice looking bath mixer shower type off ebay for about £30 for my bath and works brill. It had no markings on it so it must of been some chinese inport but cant fault it. I would advise cange whole tap.

I would just stick to brushes and a hover. At least you know all the crap is going to be gone in one go with brushes and you dont need to open and close the boiler many times with normal method.

Yes found some now, thought they would be about 20p each, not around a quid. Thanks very much

I just want the duct cap not the whole valve

Anyone know where you can buy the white lockshild valves covers, not the hand wheel type just the basic dust covers

Have you tried to see if you have a spark it sounds like spark probes,ht leads or transformer. The photo cell only detects a flame to keep the oil on.

I am not sure it has a leak detection function but will get it from van now to have a look. Its not stolen its company been off 3mths ago with same problem.

Hi all I have a testo 325 which is about 2-3 years old not 100% about age. I went to analyse a burner today and the readings were way out, the co2 was very low 5%, and the o2 was 13% I know for a fact the burner is ok and set to about 9% co2. Has anyone had this problem with a testo before as...