Search results

Hi Sounds like a low pressure problem. Try raising the pressure to 1.5 bar COLD. There are other things that could be wrong but this is the place to start. HTH

Hi Give it a dimple and solder it might be an option.

Hi Sounds like it might be set to default settings you'll need to get the instructions out.

Hi Try this web site it might help. http://www.lunns.net/cisternspares/buttons.htm

Hi Try balancing, the FAQ's will walk you through it.

Hi Try this web page, might help? http://www.grohe.co.uk/m/25_957/page/modules/pn/article.php?part=view&action=view&product=37101X998&offset=0&amount=15

Hi. Any pipes under the floor?

Hi Wickes, City plumbng and Travis perkins are all part of the same group and cities use Iflo products.

Hi Seems like it might need cleaning out. Sludge and corrosion create gas and means regular venting required. HTH

Hi A piece of wood with the edges removed spanning the two taps might work? HTH

Hi One of these might help http://www.screwfix.com/p/socket-plug-grey-sp296/18082

What came down the downpipe? If its close to the sink you could connect it to the sink trap.

Hi Dishwasher waste out the same drain as the sink. HTH

Hi There are 2 tags low down that push in and at the same time lift upward the whole flush valve assembly should come out. The problem is most likely the rubber washer. The washer may have blisters on it if so pop them pull it off and fit otherside up. A new washer is the only answer. Also...

Would these do? http://www.screwfix.com/p/monument-tools-manhole-keys-125mm-pack-of-2/14087

Hi Slope it away from the brick wall or add drainage at the brick wall. 150mm below damp course would be better.

Hi Best you get some in who is qualified to do it. Or better still take the course yourself?

If its over 15l you need to hold a G3 ticket.

Hi Buildbase and Plumbase do plastic washers that might do.

On the side is Okay. Use a anti vac bottle trap.