Search results

What are most circumstances?

Can somebody tell me what the legislation is concerning condensing boilers. ie.do all new ones have to be condenser?

Excuse my ignorance but what is the 'flooded plain'

Hi Is it best to site a shower pump closer to the tanks or the shower.(is it best for it to push or pull ?) Thanks

Hi Can somebody recommend a good quality make of shower pump (double ended) as the second shower force pump I have had has just died on me. Thanks

Hi I am about to start on recovering an overgrown garden of which part is going to be bark chips and part gravel.I have already put down Round up to kill everything.It will then be rotovated and levelled. Can somebody advise on which type of membrane to put down before the chips & gravel...

Hi I need to run a small extension lead to supply the washing machine & tumble dryer temporarily.The total rating is 4900w.What amps will this draw so I can find a small extension lead with the correct rating Thanks

Can somebody tell me the calculation using diversity for working out the Mcb rating for a cooker / hob circuit. Thanks

I definately think it is a combination of appliances,I have just replaced the heating element in the w/m (only 3 years old and that seems to be behaving itself but the brand new oven in a newly fitted kithchen has a l-e and a n-e mega reading of 2.05.I think this in conjunction with additional...

I currently have 30mA control on the incomer. This is what I am looking into at the moment. I think it is a combination of new kitchen appliances (oven, microwave combi, fridge/freezer and dishwasher) and older washing machine and tumble dryer. Can you tell me the calculation for converting...

Having a TT system that is prone to nuisance tripping,would it improve the situation if I put in a second or even a third earth rod to reduce the earth resistance.

I do have a mega, apart from the heater itself what else can i test?

Its the 30mA RCD control which unfortunately is the main incomer on the consumer unit. Can you suggest any other way of testing it. I`ve tested the new heater and it seems to be ok.

Have fitted new heater and it still trips out at exactly the same time on any hot wash cycle. Could it be that it is sited in the garage ( has been since last April ) but could the cold be anything to do with it ?

I have an AEG 72630 w/m that trips out when you try to wash with any program that requires warm/hot water.It seems to trip out when the water starts to be heated.I took the heater out and tested it and it seems to have a small amount of earth leak.What sort of reading would cause it to trip ,if...

Listen guys,i'm sorry for not grasping this but if as I suggested I replace the 100A incomer on the split board I have already bought (contactum 14 way)with this http://www.tlc-direct.co.uk/Products/BH80slash2slash100.html would it not still be acting as a split board and give me...

I have already chosen a contactum split board from tlc http://www.tlc-direct.co.uk/Products/CMPS14slash80N.html Can I replace the standard 100A Incoming isolator with the 80A 100mA rcd incomer. Would this not be the same as in a seperate enclosure.

Does anybody know who else apart from MK make the 100mA time delayed rcd Incomer for a split board Thanks

Could you point me in the right direction for one that has the necessary time delay. Thanks

Is this the type S you are referring to www.tlc-direct.co.uk/Products/BH80slash2slash100.html What do refer to as HIGH earth fault loop. If I have the correct earth loop impedence can I still not use a standard douple pole main switch,does it definately have to be rcd.