Search results

just tried mine, it dropped very very slightly, when in hot water mode, but hardly noticable? by how much is your dropping?

Well thats their 1st mistake, thanks Tony(y).

90 degree angles you say? please explain(n) File the Buildings regulations comp cert? what is this you speak ov?

are you checking the pressure when its cold? ie, not used for say an hr?

I dunno? does it need one? is it required for regulations?

Im going to have a stab at this one...... Could it be that your diverter valve is faulty?...stuck half way?...

Well its installed now, new Worcester Bosch 32CDi compact combi....so far all seems to be working fine, what do you guys think? Can you spot anything wrong with the piping?:whistle:

DONT/NEVER/EVER/EVER!!!! measure resistance with power going throught it.. or you will fry your gonads, and worst still you will break your multimeter.

Is your tech knowledge as good as mine I wonder?:whistle: Maybe your not as good as you think you are?:notworthy: . Is ACS stuff as difficult as the test you do to get a CSCS card to get on site?

Looks like he's hammered both ends closed too... Should be OK to rip out now :p

Old water pipe it must be? Under floor boards it goes, internal double skinned wall it enters,.. Fire places upstairs I have seen... Old houses it was.

Not if your wearing these.......

Run the pump?

I'd be careful.. I have a lead gas pipe running from the meter to the fire place which is still in use... You can't see this from the actual meter as it's t'd off under the floor boards, looks all copper from above, but down below is the danger, I also had another length of lead running into...

It's called a match;)

Disconnect newly installed rad.. Power up heating system, open each new valve in turn, do you get water flow from both ends? (y)

Well that's the best it's going to get, most of the external wall side joists have been replaced, capped and repositioned. New floor partly down, New skirting to be fix in at a later date, All rubble and soil removed, nearly 3 wheelie bins full, cavity cleaned out, where I had access to it...

Hmmm you forget to realise that people have already been down the route of.. "get a professional plumber in" paid a non cheapo price" many times in some cases, "fitted a professionals superior parts" etc.. That's why they come onto forums... Durrrrrr! :confused: And all you get is "get a...

Another quality job(y).

No shower mixer controls... Electric shower..... IT has to be the taps that cause it, as when turned on it happens? :mrgreen: There's nothing else in the circuit.