Search results

do away with the fourpack and have a bulk tank fitted [600kg min] if possible it is cheaper to buy gas in bulk.upgrade all your insulation and have decent controls added, a cust of mine done this a few years ago and made considerable savings reckons they are saving a tank fill a year.

or http://www.inspiredfires.co.uk/store/products/700_traditional_balanced_flue_gas_stove.asp MOD 2 hope that aint advertertising :wink:

a flueless would be a no no, firebox and vertical flue expensive,have a look for fan flued fires or a stove can be pricey though. http://www.inspiredfires.co.uk/store/products/results/?lv=FireTypes&type_id=78

you would be better to call the manufacturers out as it may need a new board they should have all the bits on the van otherwise you may purchase a fan and find it is the board. this boiler only ran for a few years so maybe worc know something rgi's do not

cannot find a 28he plus combi but the c1 code is fan speed too low all you can do is check all the connections and fan, replace as req this is for the r25& 30 he combi

agile as i have said before, pompous self righteous and patronizing would be a polite way to describe you.if you were to email me then i may consider enlightening you with the info but please send your corgi details to prove you are competent to use this info correctly :lol: i appoligise if you...

hold your horse's god :lol: no one is being secretive about anything, you are forever telling people how good you are with boilers with your talking down and belittling tones :shock: get off your backside and do what the rest of us mere mortals do BOOK YOURSELF ON THE COURSE and learn or are...

diagnostic codes can help but when the boiler displays a fault which they have not encountered that is when the fun begins :lol:

to back up what the plumbing miracle is saying i know of one manufacturer that is doing this to a range of boilers unless you have been on the course and got the service pack you cannot alter/adjust or reset the parameters on the boards,the mi shows 10/15 faults the service pack shows 32 plus...

paul it was a baxi solo pf3 not too much has changed in them for years

no bickering or moaning being done :lol: just telling the truth about certain baxi products :lol:,as all the spares places are closed a pensioner would of had a cold xmas if left to baxi but an employee of another company had a spare one so the INSTALLER helped them out ,which is more than can...

no gwn done tony we notify building control for free :lol:

why ask for the serial no?we fitted a baxi in august serial number said it was made in 05 baxi would not come out under warranty unless we could provide proof of purchase,no prob we only fitted 1500 of these boilers this year :roll: when the suppliers contacted baxi 30/12/06 was the date given...

warmflow oil boiler with rdb burner not too bad oil pump replaced 3 years ago boiler is 7 year old[my fault pump had to be changed kept running out of oil :oops: :oops: ]used to mains gas then went out in the widerness :shock: no gas available :roll:

viessman do a special liner that drops down an existing chimney i do believe,my policy is to keep it as simple as poss and flues as short as poss saves problems in the long term 8)

chris i have not had the pleasure of fitting or working on a valliant since the mid nineties 242/282vcw i think, so cannot comment,as far as the isar pulled two out, a couple of weeks ago and replaced with greenstars 28i jnrs.in fairness to the isars they were thrown in very badly not really the...

Does anyone know of a combi-boiler, condensing boiler that has worked for ten years and more without needing any spare parts. Cause thats the last time the Glow Warm boiler needed a gas valve and a pilot light thermocouple. :lol: :lol: :lol: :lol: :lol: :lol: :lol: :lol: :lol: :lol...

you can check it with a test kit around a tenner from plumbs or you can take a sample and have it analysed by a lab,chris has only told the truth about bg some employees are good some are salesmen the majority are swiss bankers but you may be fortunate to get a good one.

i always use 9mm armaflex,but you can use denso,felt wrap depends on the depth of the chase,or if you want to do it 100% pipe in a pipe :shock:

hardon :shock: