Search results

it is not the HE Model so that x2 is ok then Cant remember the exact Burner pressure but they where what the MI 's said I think they where about 11 mb

Sorry spelling is bad GAS PRESSURE about the X2 on the kamco web site it says do not use x2 on the vokera lina 28

can you not clean them out only I was told there £98+ VAT

when I shut the tap off when the boiler went off it displayed 96 Is this the heat ex, if so I take it that it is the dhw heat ex not the main one

Thanks a lot for your comments The blocks are free and I was going to render any way so it looks like I will use them

thanks how would i do that with a membrain or some sort of paint

I am building a single story extention on my bunglow and my mate has said he has loads of blocks to do it but they are 8" blocks can i use these and put insulation on the inside or do i have to have a cavertiy

Thanks fellas

I wanted to to fit a boiler ( pumped) and the aga (gravity) to one hot water tank so they can both heat the hot water

all the web sites have a solor panel conected to the other side can i just replace this with the aga would I need some sort of control

Any one got a idea how to plumb in the flow and return of a soild fuel aga in to a hot water tank Do you just tee in to the heating system flow and return Plase help

thank for the reply i will try that

I have changed both thermistors still the same

I have all ready fitted this kit no diffrence

Can any one help The hot walter runs hot then cold about 30 seconds I have replaced thermistors overhauled the diverter valve replace over heat stat checked gas perishers Cleaned out secondary heat exchanger represhrised expansion tank The water preshure is high checked the fan...

Can any one help I have a vokrea lina 28 combi boiler the heating is fine but run any hot water tap and it goes hot for 30 secs then cold for 30 secs boiler lites for about 20 seconds then goes out then relites Pump is ok Diverter valve has been changed gas pressures have been...