Search results

breezer- i usually upload to photobucket which i did, and transfer it across but it didn`t work. thats why i just used a link

ill speak to someone bout it tomorrow, and i will have all the answers you need. ill reply tomorrow at about 5-6pm. cheers

so is this one below? i just noticed you said cp8 where as the new one is called the cpl8. ill speak to someone tomorrow for you, see if the lcd one works with your panel. failing that im sure you can still get the one you have anyway. but ill confirm that tomorrow for you aswell...

its gotta be faulty then. i know the system and it is a replacement so it should work when fitted.

have you tried wiring your old keypad back on to see if that works? cause if it does new pad must be faulty

see when you changed the keypad did you try and press a button? ive changed a few off these keypads before with the system still working, and when its changed it looks totally dead. then i press a button and it comes to life. failing that its either wired wrong or fuse blown. you could also...

ive got a keypad here for a cp8. i can`t get the pictures to upload for some reason. ill see if i can find a link to one i have...

Steve. you should still have at least one user code with that system.

have you got a picture of it at all? its just there are diffrent eurosec keypads for diffrent models and they don`t all work with diffrent panels. so a picture would be helpfull or the full model name would help ie/gardtec eurosec ??????

i couldn`t find a manuel for yours but i did find a model like it. it says to turn the chime on/off press * key zones on chime will now light up press the zone numbers you wish to switch on/off press * key to finish. hope that helps

sounds like they have turned the chime on to me. i can`t remember off hand how to turn it off. ill see if i can find out and post again soon.

whats wrong with it exactly? is it you just don`t know the user code? or you don`t know how to reset it? because if its just a reset it needs. you just press 0 . if its a new code you need, because you don`t know the one thats in it. then it needs to be defaulted and reprogrammed. which means...

agreed with the man above.

this is the one i got http://cgi.ebay.co.uk/LATEST-UNIVERSAL-CAR-FAULT-CODE-READER-U480-OBD2-II_W0QQitemZ110284496003QQcmdZViewItem?hash=item110284496003&_trkparms=72%3A1301%7C39%3A1%7C66%3A2%7C65%3A12%7C240%3A1318&_trksid=p3286.c0.m14 ive used it on 7 diffrent makes of cars and its worked...

no problem mate. cheers

alright gary. how many zones are you using on your system? because on the G3 panels you have to disable zones you are not using through the engineer side. when you walk test they all are active unless you have disabled them. from memory to do this you press PROG engineer code press number 5...

what system was that ? optima RF ? cause there heavy on batteries(6-8months), all the new systems are excellent on batteries.

it was just a example. i wouldn`t do it but ive seen it. what im trying to say is sometimes you can`t hide cables so wirefree is a better option. otherwise it will look ****e

ok breezer i know what your saying here. but ive fitted many of these pet friendly sensors and ive never had any bother with them. i can think of several houses with them and the cats run up sofa`s etc. but still ive never been back. when the service time comes ive never had any complaints from...

fair enough you have to buy batteries. but sometimes better than a cable running up your living room wall