Search results

Cheers guys gonna flush heat exchanger it's sounding like lime scale build up using fernox ds40

Another thing is all rads heat quick not cold spots...so crud in system wasn't something we we're considering

Many thanks for the insight no won't be doing anything just some ammunition to get back to the engineer with. Seems they don't try anything unless its suggested

Yes was looked into but as mentioned no pcb error or lock out and all seems to be working fine. The temperature outside thing surely would point to something in particular?

Cheers yes that's the plan I will upload it.. But it's pretty specific the issues hence the questions

They have been back but it's annoying ... Another thing is it seems to NOT do it when temperatures outside are above 12 degrees like today. Just want someone who's had similar as keep throwing money at it as seems gas engineers just want to keep replacing parts starting with cheapest until it...

No it's defo not pipework bud as far as I know.... I'm sure it's coming from the boiler. Like I say it's not doing it all the time, imagine a fan is loose within a housing metal type noise.. banging type. Really hard to pin point

Hi guys, I have a Potterton FSB 30 HE. I just had a major service. The boiler was completely taken apart, cleaned out, and all new seals and a new burner were installed. Everything runs great. All the radiators are hot, and the boiler runs smoothly, except for what seems like the very first...

It's due in 2 months... All I really want to know is, this going to be a major parts costing or simply a service... Not doing ANYTHING myself just don't want to be taken for a ride with continuous parts renewal until it's solved

Right the plot thickens the electrodes have been replaced now as soon as the door is popped back on it stop working and turns off. No red light just stops burning?

If it did what would you advise?

No it doesn't...

Hi guys My potterton fsb 30 seems to eat electrode sets. Issue is weird I'm having when I try to get my central heating only the boiler attempts to light ignition but fails after few attempts then locks down ignition red light. BUT water only it works it heats my hot water, now the odd thing...

This was picture he sent.... Perhaps if was checked on service I wouldn't had to call him out twice.

Also after refitting my trap he left the bung loose and it was dripping water into bottom of boiler case and on floor I had to tighten it myself. This is what I came home to on his first visit, wet blue and just left there, water in puddle on floor too.

Weird again this morning as I type... Its working as it should do. But it will lock out later today 100%. Would random lock outs be down to pcb? I have had BG clean condensate trap out on last visit as was blocked. Their solution to the problem when I spoke to the engineer on the phone while at...

Hi guys Sadly seems British gas have given up on my home care call outs. They haven't turned up the last three times. My boiler locks out single red light, now heres the thing not always. And seem to be when I try to use both HW/CH at same time, also when I use CH on its own seems to take a...

Well it's flashing isn't great they leaded as well as used the kit maybe cut opening too large but like I say been nearly twenty years since we did it. Will post pictures

Cheers bud... Yeah crazy no idea where from though seriously no sign on it anywhere. Yup wood's dried out now and apart from some flake off it's dried solid I'm sure it's from velux but just can't work it out. Leaving it open and can see as it's only a certain patch