Search results

  1. C

    Air locks

    Thanks,If you were working on an unvented system you cannot get air into the system?if you could how would you remove the air lock. If you had air in your central heating you would just bleed the rads in a vented or un vented system?
  2. C

    Air locks

    I have seen on another forum you can use a washing machine hose on the hot and cold connections to get rid of air locks,can this be used on any system combi ,vented or unvented?
  3. C

    Easy mount hinges 90 degrees

    Thanks jason
  4. C

    Easy mount hinges 90 degrees

    Thanks jason ,i was thinking of laying on the door ,could this mean i could increase the thickness of the door as there is no door next to it cheers.
  5. C

    Easy mount hinges 90 degrees

    Jason thanks,but i cant see where it says what is the max size door thickness ,only the carcase.If i used 2x2 as a side frame i wonder what the max size door thickness i could use thanks.
  6. C

    Easy mount hinges 90 degrees

    Easy mount hinges 90 degrees screwfix,what is the max thickness door for lay on or inset door thankyou.
  7. C

    Moving pipes

    The tomplum on you tube, some good tips and tricks on how to drain down rads.
  8. C

    ohms resistance

    Hi coljack so if i have appliance at 16w or 18w how do i put that into the calculator 230x230 divided by?000.16
  9. C

    ohms resistance

    Thanks coljack
  10. C

    ohms resistance

    Bas ,i am a diyer but some of the topics i have posted i had seen on other forums but were not fully explained unlike this site , i only asked some of the topics out of interest,dont worry i am not doing any illegal electric works.
  11. C

    ohms resistance

    Some of us dont have the time and money to do the training ,life is not as easy as that sometimes,why dont you take your frustrations elsewhere
  12. C

    ohms resistance

    Ban this is a diy forum ,how do you know why i am asking the question ,if you dont like answering questions you dont have to,why are you such a negative person .There are so very helpful people who take time to answer peoples questions ,sadly you seemed not to be one of them .
  13. C

    ohms resistance

    How do you work out what the ohms resistance should be on appliances kettle, electric fire ,hairdryer and motors etc thanks.
  14. C

    Multi meters and rcds

    Thanks guys
  15. C

    Multi meters and rcds

    Do basic CHEAP multi meters trip rcds when testing LN LE NE AT SOCKETS AND LIGHT SWITCHES?
  16. C

    Ceiling rose

    What is a two plate or three plate ceiling rose,what situations would you use the two different types thanks.
  17. C

    Loop in loop out

    Thanks guys.
  18. C

    Loop in loop out

    Thanks flameport ang coljack,why is it not advisable to tape the terminal block
  19. C

    Loop in loop out

    ?
  20. C

    Loop in loop out

    So what would the wiring set up be at the switch thanks.
Back
Top