Search results

Maybe worth calling out Transco. Tonight if poss

Press the flame button see what happens

No f16,s around here tonight either might have had a dc10 fly over tho

No F40 in mine either ? :cry:

Put it in no trunking needed nice warm skirtings :D No probs its fine try not to have joints under the floor

Maybe worth calling Worcester and asking for them to either come out or give you advice. They are expensive, It does sound like a air/gas ratio problem but I couldn't be certain. I would not pay for a powerflush. Give worcester a ring

I am trying to think how you could convert an electric hob to an lpg :D (only joking) You are ok with an openable window :wink:

good night :)

You could try taking the pan out but before you do check in the garden to see if you have a manhole that is running ok to elliminate between the 2

Pan upstairs in a house not flat or downstairs House/flat ?

From here in my living room I may be able to help :D That nut that you say was hand tight, Tighten it more than hand tight with a tool like a pair of grips not too much as too slip the thread but tighten it. It maybe it is a little loose and when you push the flush handle down, It may...

Impossible to say without knowing the layout and whats happening I couldn't say. The next thing I would look at is if the manhole outside was filling just to define how far that perfume bottle has gone. If you do find it is it pretty full so you could give it to someone for xmas...

I am confused :( The cistern (flush tank) is above the sitting down type thingy yes? You get a leak when flushed, not at any other time?

Have you got any air vents in the airing cupboard?

:cry: what have I done answering this :cry:

No hang on. Is your flush tank on top of the pan or have you got a pipe between the two?

Could be anywhere you got probs :?

I take it its close coupled ? if so you need to take the cistern off and replace the foam or rubber washer. Easier said than done with rusted bolts :twisted:

get your hand down there it might be stuck just round the bend :lol:

motorized zone valve?