Search results

  1. R

    Wiring up multi outlet ceiling rose

    Thanks they are coiled up and sleeves are away from the ends so they don't fall of or get caught
  2. R

    Wiring up multi outlet ceiling rose

    Thanks for that. Yes all noted and photographed cabling at switches etc
  3. R

    Wiring up multi outlet ceiling rose

    We are currently having our house plastered and thinking about multi outlet ceiling roses (something like this) http://tinyurl.com/go4cfmg . The house has been re wired. I am fairly capable of wiring up straight forward stuff like ceiling roses, but i am confused as how i would wire these...
  4. R

    Building a new brick wall

    Thanks, I don't really want pillars in the wall. Also the wall is long on one side. About 22 meters. I will read the info on both links :)
  5. R

    Building a new brick wall

    Thanks . Its going with the slope
  6. R

    Building a new brick wall

    Thanks guys for your replies (and girls) We have decided to get a builder to do the actually brickwork (we will get materials as we work for a company which owns a large builders merchants so get good rates. We will however do our own foundations, due to cost we are going to go for a brick and...
  7. R

    Building a new brick wall

    Thanks,is the a reason i couldnt go for brick and block type?, is this due to weight?
  8. R

    Building a new brick wall

    I currently have a large garden boundary which currently has a low wall (in sections) with fence panels above. I intend to replace this with a solid wall. First of of all how do i assess if i can re use the original foundations or not? (i have not checked out the foundations at all yet). I...
  9. R

    Downstairs toilet basin sink -32mm to 21mm possible?

    This is the current set up that i currently have with regards to the toilet, this soil stack does not go through the wall but seems to finish in the wall and go down. Could i fit a collar boss on to this waste pipe as shown?, i have seen a waste collar with a 32 screw fitting, Would i...
  10. R

    Downstairs toilet basin sink -32mm to 21mm possible?

    Haha, well am just running ideas in the open, best to get rid of any ideas that wont work!
  11. R

    Downstairs toilet basin sink -32mm to 21mm possible?

    How about if i ran with the idea, but reduced from 32 to 21mm and then when outside again and space permitting run it back to 32mm, would that help?
  12. R

    Downstairs toilet basin sink -32mm to 21mm possible?

    The issue I have is the space getting outside with the gas box on the outside of the house. It may be possible to go into the soil pipe
  13. R

    Downstairs toilet basin sink -32mm to 21mm possible?

    I am having kitchen redone and because of the way the old layout was, the waste from the downstairs toilet went through the wall and it in to the kitchen, This can no longer happen, i can just put it straight through the wall because of the gas box on the outside wall! Due to the...
  14. R

    Removing radiator

    Thanks will be able to put a drain off valve when I put the radistoor back on in the summer
  15. R

    Removing radiator

    Thanks. As long as it won't affect the flow I will just cap the ends
  16. R

    Removing radiator

    I need to remove a kitchen radiator, it is the lowest radiator in the house (with drain valve etc). It is on a combi system. Now do i need to create a return on it? due to the fact the radiator wont be there?
  17. R

    Self-levelling floor to join existing floor - advice welcome

    I have started a similar thread to yours and mine is very similar apart from not needing a DPM I am thinking of filling the older lower floor with Weber self leveling sceed and then our tiler going over the whole lot again.
  18. R

    Using Weber Floor Flex

    We are having our Floor tiled in the summer, it is a kitchen with a extension. When they putt the floor in they put it at the same height of the old tiles. These tiles were a kind of yellow colour with a screed base. Old and very solid So have taken these tiles up and this has meant the...
  19. R

    Rendering Top coat

    Is the a reason you dont use waterproofer in the second coat?
  20. R

    Rendering Top coat

    Hi Roy We did put waterpoofer in the scratch coat and we used 4:1 using plastering sand.
Back
Top