Search results

Agile you really like giving BG a hard time. Suspect you are perfect of course. Do not usually rise to comments but resent being labelled as a poor engineer. Keep your comments to the subject

Thanks Agile. Please DO NOT tare us all with the same brush. This is NOT the forum for slating individuals or companies. Please do not try to fix your boiler yourself. Complex boiler with known problems to look for, you will miss these and potentially cause a huge hazard to yourself and...

More than likely the diaphragm,,cheap part but pain in the backside to change. Cdi has always been a largely reliable unit ,,BUT,,,there are a number of jobs on it which on most boilers are simple but the CDi design can hinder these repairs. Standard diaphragm repair kit that any repair engineer...

Had something like this years ago. Are you SURE it is not the bigger tank that is not overflowing. If it is,,,,,it could possibly if you have one a thermostatic mixer(shower) passing back through the hot water side. That is if it is the domestic tank overflowing. Just a thought. Get it straight...

Bottom feeder, thankyou. If you know anything you always test, test and test. Have had up to 2 supplys into boilers, so dangerous,,,,never be complacent. Fused spur always prefferred.

Heatline,,,,,where do i begin. Built in Turkey say no more. Sorry to be negative but Heatline spares,help, engineers. Waste of time. Pay peanuts,,,you know the rest. Been bitten

Not D.I.Y. stuff. Get someone who knows there way around a Baxi. Pos just micro-switch but usually more sinister. These boilers do not drain down like normal b oilers so would not advise you do yourself as you could be confronted with litres of very hot water. Plus expansion vessel needs to be...

Mmmm. could be main heat exchanger if you say burner is modulating. To check other post leave system until completely cold (heating) then turn on the hot water and see if the temperature in the hting flow pipe starts to rise, if so yes the wax capsule. If not then the main heat exchanger is...

manufactures of these units blame everything from "Thick walls" to mirrors. Also wireless doorbells and wireless routers are also blamed. thought they would have sussed this before manufacture.

If you are an engineer involved in just repairing boilers then you would realise that there are still a good number of cowboys out there who still tarnish the proffession

yeah CDI. Good generally reliable boiler,,,,but,,,,so many basic jobs onit are so difficult. Expansion vessel, unless a remote can be fitted, nightmare, well invloved shall we say. Isolation valves well lets not go there,,one option boiler off the wall. Bosch engineer said to me "Yeah bit of a...

Early ones had separate prv. If it is a combined unit it can be done without taking out heat exchanger. It is not a difficult job if you know how and does not take very long. Have done plenty. End of the day the engineer has a living to make. Van to maintain deisel and other over heads, and yeah...

Believe the little fan on top helps cool the motor. Prv termination can be classed as At Risk if the termination could proove a hazard. Above doorway, not terminated outside. At the end of the day water could come out of that pipe under pressure and very hot, in reality usually just drips but...

1..no 2..no 3..no You need to update to fully pumped and why not consider updating boiler as well as it is probably a cast iron heat exchanger very inefficient and probably qualify's for scrappage scheme.

Worcester bosch or Vaillant.

That is not the normal B/gas price for a normal 22mm magna clean on a combi,,sure he did not include other stuff in that price . I would certainly quote cheaper than that off my laptop. Yes we are tied to prices but there is room for negotiation

I would go with the bosch. Duo Tech had some issues myself. Vaillants good too but as other post after sales stuff not so good

has the boiler had the insulation retention update. You

Yeah as my post said,,,,assuming everthing was ok But has deteriated. But yeah Agile Competent engineer req :D

Done the job what a ball breaker. Terrible, terrible design.