Search results

So you will have 2 10mm tails cut under your floor, which you then want to add 15mm tails too then branch off that to pick up 2 rads? If thats the case you are wasting your time. You need to get back to the 22 or 15 that the old 10mm tails come off and start from there.

None. As long as everything is fitted properly its all fine with everything that's supplied. Only time i use silicone is a blob under the top hats. Dont ever use silicone on your water fittings i.e your cold/hot water joints. Will cause tons of hassle, wont do anything as a water seal and...

So your just going to have 2 blanked tails sticking up from the rad you remove? Honestly 90% of the time its just not worth doing jobs yourself that your not sure of. You end up costing yourself a fortune in bits because you get them from B&Q, it never looks like a professional job and when...

3 hot taps? Meaning you have a en-suite? If you have then you really need to be looking at water delivery rates. The 24junior is something around the 10.7litre a minute, so not practical for a 2 bathroom house. If you wanted to stick with a Worcester you would be looking at something...

Without wanting to insult your inteligence have you checked that the hot water dial is moving the pot on the pcb? Have you turned the temp stat down and ran the water through? Dont forget the 400 has a small tank of stored water, so if after a few minutes of pulling the hot water through you...

Plus you need a FGA to install and commission one. Plus someone only wants to pay you 50quid to install it Plus as someonelse has pointed out they need at least 100cm2 of ventilation Plus why the f*ck are places like B&Q allowed to sell these But on the plus side, they have to pass...