Search results

in north america most car head lights and tail lights use ribbed drivers

they have small household measuring reader in the usa that you plug in the wall socket and then plug your individual item into it and it has a digital reader of how much power that equipment is using. They might try a electronic shop for one.

maybe I steered you wrong . I,m using one 12volt 800cranking amp car battery to weld .005 thick nickel tabs on power drill battery cells the switch is for sending a very short burst of current thru to spot weld tab to battery cells. I just don,t want switch to stay on ,it must only on long...

problem is your underlay , coating if added will wind up cracking again.

everyone is having the same battery problems! go to google type in battery school and learn what were all doing wrong

thanks for your reply. I think a panic switch is the way to go, it can not stay on when pushed so the charge of 800 amps DC from a car battery will be only for a split second. i'm building a spot welder for battery packs on cordless drills.

do you have the right cartridge yellow or red depending on your color in gun, also when did you last charge you battery. also check to see if plastic top of cartridge is seated proper push it down tightly before inserting in gun.

Glad to hear you fixed fence problem, but I,m worried about the 2 feet raised level. do you have proper drainage for runoff or in rainy periods will you have a lake to contend with.

Question for all you in the know electrical people! I am looking for a good power button or push switch. It must when pushed turn on and off in about 1/4 second and take an electrical shot of about 800 amps. any sugestions?

Xerxes is correct - if the curved cut is close to edge of the tile you can buy a hand coping saw with carbide rope blade and do it by hand

If you have a variable speed with hammer feature it would best low slow speed for core drilling and straight slow medium with mixing auger for plaster , although a straight variable would get you by I presume you are using a 5 gallon bucket

I,ve Done at lest 8 this week for customers including metal hydride all worked well. As to battery strength, dont use more than twice the voltage of the battery you are trying to fix, I tried to fix a 9.6 with 36 volt one time and got too violant a result. With the question of who and when you...

you don,t need two cars just batteries

are you doing walls and floors? strait cuts or curved. if strat cute a hand operated will be the cheapest but buy a 20 to 24 inch incase you might someday want to do 24 inch tiles. If curved or wall socket cut outs are in order you might buy a medium priced wet saw and cut sockets from the...

it may work i have not tried it myself i know lithium ion is out they may overheat and explode

glad to see two of you want to save money. this is not a new process, it was produced for NASA many years ago because thier batteries would not last in space on long missions, the batteries would go dead just like your power drills. So they came up with a method to revitalize them in space.So...

crazycanuck here. instead of throwing out or moving up to new batteries revieve your old ones . I work for a battery co. and we do it all the time. Ifyou are interested its free just anwser this topic.

google says check- Stonetec-uk.com good luck

did a google searchfor you gd-3002 got foshan gao check it out ps: your id search came up under diynot.com hope this is what you want,d

if you havn't finished your post removal? use a good strap or chain and a car jacj should do it.