Search results

is this still the case despite the fact i only have this problem on one side of my loft

so by the sounds of it basicly i need to get some ventilation going on

at the moment the loft has insulation and then boards over the top. there if no chimney brest

i think so, there are no holes, in the felt. as i said were the felt joins, it has started to curl away. but on a hole the felt can have little droplets of moisture on it. i assume its a build up of condensation, however 1 side of the loft is fine. how do i gain more more ventilation in...

i have a little problem i was hoping someone could help me with. One side of my loft drips water through the felt. what has also happened is as the felt runs down the roof, and a new section of felt had been added, the overlap has curled away and can also let in a little water, i was...

i have had a dodgy rad for about 3 years, it never heats up, i have bleed it, cleaned it just about anything but i have finaly figured out that one of the pipes leading into the rad is blocked, i would like to know what is the easiest way to unblock this pipe so i can get the water flowing

do i just pop one of these on each of the water taps under the sink re connect the pipes to the washing machine and dishwasher and hey presto?

dishwasher fittings!!! im looking at buying a dishwasher however i have one question. the hot and cold taps under my sink are been used by the washing machine, i have no other wather pipes i can connect to so how do i go about connecting the dishwasher to the water supply that is also...

All the Rad Experts Please look in.... ok i have been having an ongoing problem with one of my rads in the spare room, (it does not want to work). i have bleed it, i have emptied it, everything you can imagin i left a post on this forum and many of you guys were kind enough to give your...

so the heating would need to be on when i try to encourage the hot water into the rad?

yes i do have a airing cupboard with a large cylnender in it and yes all the other radiators still hot?

ok i have tried the above: by opening the flow valve only and the bleed valve it must fill with water, then by opening the return valve slowly water should cirulate. i emptied the rad, opened the the flow valve and the bleed valve, the rad filled with water which was cool, once the...

which ones are the flow valve, return valve and the bleed valve??

i have tried to bleed it from the top untill mucky black water comes out.

ok the pipes are 8mm, they have yorkshire imperial knobs. both the hot and cold pipes go into the rad in the bottom right hand corner both pipes going in at the same place So you closed both valves to remove the rad then the flow was ok when you tried it so the only thing you changed was...

im not to sure what valves they are. the hot and cold valves go into the right hand side of the radiator, when i took the radiator off the wall to clean it i tired the hot and cold valves, both hot and cold water came through ok. the cold water is the standard on and off tap the hot...

1 radiator in house cold, pipes into it are cold aswell?? i have this problem. 1 radiator in the spare bedroom is cold, the pipes leading inot the radiator are cold as well. i have tried bleeding them, i have tried balancing the System i have even takne off the radiator and cleaned it...