Search results

Try PME, by giving them a ring, im sure they have contracts on the East Coast http://www.plannedmaintenanceengineering.co.uk/

I had this same problem with a little old lady, she was on mains for COLD and open-vented for HOT, doesn't mix properly, colds too high.

Emigrate to where mate? Aussieland?

Stuck with this one. Putting on Central Heating programmer, and calling for hot water as normal. However, it is only slightly heating the water in the indirect open-vented cylinder, is this a port valve problem? Maybe only opening slightly? - The heating is very warm, as normal, so I can't...

4" Flexi pan connector!

Yes - just use commen sense and dont allow them to run onto each other, use the T as the run from say the BATH is approaching the STACK.

I work there aye, I dont think PME are recruiting, but he could give them a ring and ask. I presume your Kirk Elwood?

Where are you from? PME Partnerships Glasgow Google them, give them a ring.

You shouldn't have to worry about laminated edges should you? If the panel is right up against a wall.

Going to go mad this week and buy some new tools, these old ones are getting shabby! The reason i'm starting this thread is that, you know when you get that REALLLY handy tool which has nothing to do with plumbing - but always works a treat when it comes to taps, bathrooms, siphons etc. For...

It depends entirely what you are wanting. You can use it with your normal central heating thermostat, and it comes on at the same time as the rest of the property.

The company I am with charge £28 for the additional call-out then an additional £20 thereafter per hour. This is in conjunction with a partnership with a Housing Association, so I presume a private call is a lot more expensive.

Try turning the pump setting down. - Maybe, since you've cleaned a few things out the water flow around the system has less restrictions, thus, it is leaving the heat exchanger a lot quicker than previously. Is the new Heat Exchanger got the same pipe run and sufficient fins as the...