Search results

Hope its a simple one I live in an early 1900 terraced house the Living room and dinning room both have Gas fires fitted and the two bedrooms above have the fireplaces boarded off with no ventilation. I have double glazing and central heating. Is it advisable to fit ventilation to the blocked...

try downloading and reinstalling the video drivers from the fujitsu website http://www.fujitsu-siemens.co.uk/support/downloads_1.html dave

I have been using a soundblaster lives and platinums (not at the same time) with win98 ME and XP Pro and home with no problems XP seem to support them quite well dave

I started with a book called html for dummies and used notepad, I picked it up quite quick and now use dreamweaver it makes it a lot easier in the long run and it is worth it.,

I have seen a product in my local shops I think it was "wilkinsons" that you apply to the affected area and it hardens the softened wood you can then sand, fill or paint to your hearts content

check for dry joint on the circuit boards sounds to me to be the most likley cause. Look mainly around the connectors try not to pull on the wires that go into the flame housing as the flame sensors break.

I have the same boiler recently the ch packed up on it but hot water was fine, I checked the two circuit boards and found a bucket and a half of dry joint, I dutifully soldered them and cleaned all the relay contacts with the finest emery paper you can find (and I mean fine almost smooth) I...

cheers Agile mine is set to full which is the main reason for asking and has been for about five years since install Dave

Just wondering what the variable resistor does on the board behind the dispaly panel it is little black control at the bottom of the board thanks in advance Dave

do not forget the essential tool all good tradesmen and women should not be without a nice hammer capable of light taps to fine faults and to completely mash the hell out of the difficult jobs

Hi just to let you know all my cleaning of relay contacts and soldering of dry joints was not in vain the problem is now sorted thanks Soggy_weetabix. 8) the ceramic round the flame detector broke and moved the detector away from the flame I now live in a toasty house again cheers...

I am thinking of replacing my combi is there any boiler that is a direct swap for a potterton puma 100e apart from another one cheers Dave

Help please Firstly the c/h stopped working (pump is free) I noticed some of the relays were carbonised due to arcing so I cleaned them I also went through both boards and sorted out various dry joints mainly on the plug pins everything seemed fine so I powered up. now every time I...

http://www.diynot.com/pages/el/el011.php#a3 Got to the above link hope it helps how many lights, what power are they