Search results

Bet ya take the lid off look inside " gag " then buy a replacement. :wink:

Sounds like a concealed shower pipe Bahco. Gonny need more than help, a few Quid as well if no access. As the man said post a pic and calm down and give a more detailed description or sketch please. Oops just clocked its one of our American cousins. Pay for my travelling time and mileage and...

Would never go in and finish a task that some one has walked out on . Never know what can of worms is waiting for you. As stated holding back cash till the contract is completed satisfactory for both parties can be a legal minefield. Come on and tell us the reasons Rob, Sometimes a wee...

Not a problem john will be there 1st thing monday get the kettle on, only problem can't for the life of me remember where your palatial abode is M8.

Mike I Would not recomend running pipe as you describe M8 ,leaving yourself prone to air locks. Your always going to get good cold water flow and pressure at sink as this is mains fed. Hard to comment on other system without looking But if you really want to improve the flow/ pressure fit a...

Yes and yes You may have to replace. Vv spindle could be sticking or Vv seat knackered. Try turning it off and on several times first to get rid of any crud in Vv, nip up with a pair o grips as well let us know how you get on.

Well done with the feedback m8 . We all like a happy ending on here. :lol: :lol:

now now!!!! :wink:

Used to work in a place where they dipped pipes in acid to clean em as part of refurbishment and am sure they used to do homers for guys that came in with old car parts to be stripped of chrome . Was sure it was hydrochloric acid. Am certain some of the drain cleaners you get at plumbers...

If it aint broke dont fix it. Keep an eye on it should run free . Perhaps you share the same drain .ie all run in to one main drain . If there is a partial blockage and it also affects your neighbours the cost is usally shared. Buy a set of drain rods for £20 and have a go yourself it aint...

Try a marine plumbers , used to fit similar in ships. A trifle on the heavy side big solid blighters.

You aint gonny solve the water level in the shower coz the pump is set to activate when unit is almost full. As said in earlier posts either saniflow is lowered or shower tray is raised . sounds like a right Heath Robinson set up .

That was murder!!!!!!!!!!! :lol: :lol:

Just a wild wild guess son cause its hard sometimes to evaluate a problem through the written word ,but i would hazard a guess and say your immersion is knackered along with your 3 port Vv.

Yes . Contact the water board and ask them to remove it at main. Bend it over if you wish but the pressure will open it up sometime later am afraid, better off out.

Wht dont you buy chrome waste pipe to suit , have done that in the past but cant remember where i got it.

Why dont you just change the syphon so that both ends are the same. Simple really :D

just speed read your post "stepney" and a stab in the dark but you may have to insert a tee piece and fit a durgo type air valve .Putting drain unblocker down aint the answer . Take your complete trap off the basin and with this acting as a vent see if it allows the shower tray to run better ...

Presume the basin and pedestal is new, or have the stickers been left on from when it was fitted along with the bath!!!!Tell him to get some rust eater a wee bit o cataloy tin o spray paint and away you go :roll: