Search results

Hello All had excellent advice in the past hope so again .. here goes DWF 30 goes through all cyles OK ..HOWEVER 1. the dishwasher tablet never gets dropped out as the door remains shut all the way to the end so there is just mush in the dispenser at the end when you open the small...

Sounds like drum bearing is going on our WMA74 Hotpoint washing machine ... already changed bushes on the motor earler in the year ,, no problems,,very easy.. whats the possibility of doing a drum bearing change myself ? loathed to buy a new washing machine as everything else works...

thanks will give it a go it was just the 2 x different materials probably expanding/contracting at different rates that made me hesitate and just start to leak again

hello as a point of interest it appears the tiny pin hole is just at the side of the salt tank nut.. it appears at some time a knife or fork has been dropped and actually pierced the aluminium base !!! doesnt apear to be corrosion as there is no other corrosion in the main dishwasher...

thanks will give it a go

thanks for prompt reply can see from underneath when i shine a torch above salt chamber with its lid off , a small pin hole wher the water drips through ...thats why i suggested just wiping some araldite across it from underneath..very lucky if this is the source of the leak to be able to...

bottom tray filling up with water .. last time there was no water or leak and dishwasher started this time there is water in the bottom and i can see the float working have drained water to get washer working and appears looking on left hand side that there is a leak from the salt chamber...

have read advice about removing right hand panel to get to plastic base and also removing left hand panel to clean out possible fat how do i remove the side panels,,? thanks again for any advice :oops:

water in base ? what do you mean ? base of where ? thanks for prompt reply :?

start any programme ... pumps out any water i have put in then appears to just keep doing a wash with the pump going but doesnt draw in any water to pump round...... press the 2 x buttons to end the cycle but doesnt stop the cycle .... appears to just get stuck in the wash cycle... any...