Search results

Was this project ever finished....be good to see if it was

If it’s foil fronted kingspan, when you seal the joints with foil tape, that creates a vapour barrier

Nope....man cave already has electrical and internet cables running to it.

Decided to remove the gravel path, take up the slabs underneath and going to add topsoil and re-sead. Once it’s taken hold, I will then cut shapes in the grass to add new black slate stepping stones down to the man cave. This is how it looked this morning And an hour or so later before it...

I would screw the base plate down to the blocks too

Yes.......but I would also lay the frame on dpc for extra protection of the timbers

Come on Dom, itching to see those pics

Not unless he lies the panels on treated timbers and a length of dpc

Not if it’s vented properly with a good flow of air... also I notice on the wall a white vent going into that lean too, is that a toilet, tumble dryer vent, if so then that’s why your also getting lots of condensation. So the new vents will help eradicate the issue

I would drill 2 x 4” holes at the front bottom of the structure, covered with mesh and a vent. Then another 1 x 4” hole above the door and again covered in mesh and a vent cover...the mesh will stop any bugs getting in and then should be enough. if you have a timber wall directly opposite the...

That sounds ok.....but what about pests getting up under neath like flies, wasps, spiders and nesting under there?..

Do you have any ventilation for warm air to escape and not condensate on the roof panels???

As I read it the metal roof panels are on the outside on top of the roof, so any condensation would be outside the building and not inside. So I don’t see an issue

Any updates on this project