Search results

Sorted!! Sussed out where the reset was, job done!! Many, many thanks for your help, I'll investigate the slight pressure loss at the weekend, give the thing a service and clean too

Thanks gents, I'll have a look tomorrow morning and report my findings Incidentally, what causes the drop in water pressure, is it avoidable??

Worcester Green Star Heatslave 12/18 oil fired combi. Will not fire up. Plenty of oil in tank, in Tigerloop and at bleed point. When it's turned on at the mains with demand for heating and hot water the pump can be heard spinning. Lock out light is NOT on, however when pressing the reset...

Thanks for that, I think a trip to the local hardware place tomorrow for a handful of olives :)

To cut a long story short, a couple of weeks back I ran out of oil and I had problems getting it to bleed up. Thanks to the forum I got it going again. Two days later, 'Lockout' light on. Went through the bleeding process again, then noticed the level in the aerator thing was very low. I ended...

Many thanks to dcawkwell, Burnerman and oilhead, all valid points :) It was basically a combination of the three, it seems that, with me being an old-time diesel fitter, that the Crossland type filter was the first thing I checked. After cleaning the bowl out I managed to put it back together...

Thanks for that, I don't appear to have a port marked P, there are two brass things with allen screws in the end which are fitted into the same (Danfoss) block as the oil pipes are. One is taller than the other, presumably this one would be the one??

Hi all, please help me get warm again :oops: Ran out of oil, no excuse I know, anyway got oil now, all filters are clear, no oil to boiler. I have a 'Boulter Boiler 3-K Oil Loop' thing on the wall outside the utility room where the boiler is-this is empty. My oil tank is below the level of the...

Hi all, I'm putting up some 6' high chain link fence(the green plastic coated stuff) around the perimeter of my property prior to building a new workshop(plenty of questions to come there :oops: ) Problem I've got is that it is sagging quite badly at the top. The longest run is about 40', posts...