Search results

Hi, Firstly, thanks for the help. You affirmed my thinking with the wiring. So i demantled the lamps and dids a continuity test. The existing red wire in B1 with the cyan arrow is actually dead. It might have been an old outside light that was on the corner wall that the previous owner...

Hi, My outside light stopped working, which consists of a light bulb either side of the front door. I removed the four gang switch faceplate and discovered a red wire has come loose. With a tester I identified that this is not live and presume it is the circuit for the switch and should be...

Thanks for the tips. I tried this and cant detect a difference in temperature either side of the pump with or without the pump on. Its just permenantly hot before and after the pump (even when no water is being drawn off the tank for hours). I did follow the vent pipe up towards the cold storage...

Hi, i followed the copper pipes from the Circulator 1 and it does not seem to return to the HW cylinder, it disappears through the floorboards in the direction of the hot water delivery pipes. All pipework appears to be copper, it changes at the kitchen extension to poly close to the kitchen...

Thanks, the timer is a good idea. I will investigate this to help reduce cost and noise. From what i see it doesnt pump back in a ring. Its just continually presurising the line ready for someone to open the tap. Very grateful for the feedback. Thank you.

Thanks for the quick reply. The kitchen was extended by the previous owners and is the furthest away, but all other taps are close to the hot water tank. Since this tank is located on the second floor the gravity feed is fairly good to the kitchen with the circulator 1 turned off. So if its...

Hi, I just moved into a new house (built 1996) and struggling to work out why I have two circulating pumps on a vented central heating system with open vented hot water cylinder. Circulator 1: Permanently running (even when the boiler is not running) and is hard wired to an on/off switch...