Search results

Cool. Many thanks for the help guys.

ok. I've read from the reviews left by people that have purchased X400 that they have added to the header tank & left it in the system for about a week to work. Is this ok? Would it be ok to add both X400 & X800 together & leave for a week?

Thanks for the tips. The system seems to be fine - rads are heating up quickly & all of them get very hot. Would add addtional treatments help remove sludge prior to drain. eg: Sentinel X400 Central Heating Sludge Remover

Just bled all my radiators in my house & all of them are chucking out very blackened/dark water. Most of them had little to no air them apart from the bathroom one which seemed to have enough air in it to fill a bouncy castle!!!! Anyway, is this normal? Or should I drain the system out...

Phoned Bosch & apparently the Aquastop should NOT be making this noise. Because the dishwasher is only a few days old I'm getting an engineer out to confirm this.

Only when it takes in water. As i've never come across one before i just wondered if anyone else notices their Aquastop when its on?

Just fitted my new dishwasher - A Bosch SGV46M13GB fully intergrated unit. Everything seems to be working, but when it fills up with water the Aquastop is VERY loud. It sounds like a mobile phone with a very loud & fast vibrate function. I can hear it quite clearly in my front living room even...

OK, i'm having no luck with the problem found here: http://www.diynot.com/forums/viewtopic.php?t=246820 So i might need to buy another one. However, i'm unsure on what to buy. Its a bit of a mine field. I dont think i'll buy Baumatic again but does anyone have any recommendations of a...

bump... Been away on holiday & came back to no replies! :( Right, i've emailed Baumatic & they've responded that the 'Wash Motor' has developed a fault. They say they can fix it but i bet its going to cost £150+ so its cheaper ion the long run to buy a new dish washer. However, I would...

Already have, theres no build up muck & blade it internally clean & all holes are open. It seems that no water is getting to the blade?

I've got a built in full size Baumatic dishwasher (cant remember the model but can find out if needed) & I've noticed that the last few uses the bottom dishes arent getting clean - even on a full heavy duty clean. I then noticed that it appeared that the bottom blade that jets the water up...

Good call!! :D I just removed the shower head, let the hose dangle on to the shower tray & the shower started working. :lol: Thanks for the info. btw, is this normal or is it the start of some underlying problem that should be delt with asap. I ask this 'cos I've had the shower...

I think my pump on my Aqualisa Quartz Digital Shower has gone kaput! I was having a shower & all of a sudden it started spluttering, so I turned it off & it didn’t want to come back on. After resetting it (turning it on & off again at the mains!) the pump unit is making a very high pitch...

Update!! right, after checking a few things I removed the CH/HW control unit from the wall & the boiler turned off. (red light on/solid & green light off) It seems that the control unit is sending a false signal to the boiler even when the CH/HW is set to off. I think I need a new...

I hope someone here can help... I've got the boiler as mentioned in the title & it has seemed to have locked it self in the on position. I've turned the thermostat down to zero & turned off the control unit yet the boiler keeps going. I've even tried another spare PCB that I had to see...

so is the thermal sensor combined with the gas igniter? This would explain why the boiler has cutting out if the igniter cable was intermitent. If the connection failed the PCB wouldnt be receiving a heat signal so the boiler would think that theres no flame & shut the boiler down. This would...

Well, i finally solved my problem. After much head scratching & inspecting of the PCB i couldn’t work out what was wrong & came to the conclusion that the PCB must be faulty. So i was standing in front of the boiler watching it turn on & off literally about to give up, when i noticed that...

nice sell there gaz! :wink:

Thanks, there does seem to be a bit of a problem with the Potterton Suprima PCBs according to the forum. Will B.G HomeCare 200 @ £16 PM {Looks after your whole central heating system including your boiler, radiators, controls and hot water} cover me for a PCB replacement? Theres no point in...

Hi there. I was wondering if anyone knows what’s wrong with my Potteron Suprime 50 central heating boiler. Everything’s been working fine with it for several years, but I recently bled the radiators (there was a lot of air in the rads upstairs) & the boiler started acting up. My problem is...