Search results

i think you guys have done it. all rads are hot! Thanks so much!!

found it mate! the previous owner texted back. sorry i didnt respond straight away. i turned the t-stat to manual and the heating up and pretty quickly the heating started working!

https://ibb.co/mv0A5R https://ibb.co/iBMiQR

will fix this! i went round an opened them all fully.

hhahaha yes! i will tell her to hunt. i literally just looked all over the house and couldnt find it. even texted the previous owner-hopefully she responds.

ok i've never noticed one. will go have another look around.

here is what i've been calling the t-stat.... https://ibb.co/ke7gUm i have no idea what the programmer is.

ok so the lock shield valves are on the rads right? just checked one of them and it was off. i guess previous owners did this for a reason? i will go round and make sure they are all on.

here are the pictures.... https://ibb.co/fxZ0N6 the bottom switch in the pic above is the one with out the fuse...not sure if this means something...? https://ibb.co/iDYGvR https://ibb.co/ggrEh6 https://ibb.co/kVCLN6

Have you checked the batteries in the thermostat?.....i dont know how to do this. i can do if advised how. thanks. Are your radiators getting hot?....yes last time they did, this time no. i dont think the heating was on long enough. Is your boiler holding pressure now? yes. Is the pipe after...

it seems like a t-stat issue more than a boiler issue doesnt it?

ok that didnt fix it.....the t-stat turned itself off again and the boiler is showing the S30 code....what shall i do? help please. thank you

i'm back at the house now and just set the p.0 programme off. hopefully this fixes the issue. thanks very much.

cheers mate, will try this and update!

and by the way, how do i find the p.00 programme?

ok perfect thanks. so to get the "boiler cold" i probably need to turn it off for a while? is it best to do leave it off overnight and then give it a go in the morning?

ah ok thanks, do i need to do this for the hot water too? also, is there anything that needs to be done beforehand to program run properly?

i did not do this! i'm a total noob with this stuff. shall i do this now?

it's sort of complicated, i wanted to give a brief overview at the start, i didnt know it was a big issue. the 2 bullet points i've written are 100% correct. apologies for confusion. i would be most grateful if you could help.

sorry about the confusion