Search results

The spring is to prevent the first wrap of hose from kinking in the reel .

You will need an extractor fan for both toilet and shower area .

I was once chasing a wall in an ex council flat ,20mm max when I saw the back of tiles in next doors flat .

Are the TRV pins stuck down ,or the lockshields not open enough to get a flow ?.

Does a ASHP not come under permitted development ?.

Combi boiler is a sealed system so separate from mains once filling loop closed ,so will be ok to use .

Boiler will be ok ,just don't turn on hot taps . Fill up kettle and bath ,for flushing loo . Then turn off mains . Find and fix guys may give you quote to replace pipes when they are there .

Hire a petrol angle grinder for slabs with a diamond blade . Clamp a bit of timber to worktop where you want cut as a guide . Use plenty of water and do out side wearing mask and glasses. I just done similar to what you are doing and it worked out fine cost about £35 for the week end .

If the valve is not leaking just tape over to stop dirt falling in . If valve letting by use 15mm male stop end .

You could wrap PTFE tape around pipe to increase its width .

Is the filler loop in cupboard below ?.

The jubilee clip on the seal looks as if its not straight on the cistern.

If Its in the street then call your water supplier to replace .

Is this it ?. https://www.manualslib.com/manual/142683/Royal-Cozyfires-Super-Sixteen-Nv-Decorative-Gas-Fireplace.html?page=2#manual

That looks like your incoming main . So better to get a new stopcock ,Pegler are decent .

So what is there now . Old gas fire or a hole in the fireplace . If going to use again get a Gas Safe engineer to inspect first . Could be a number of things ,ventilation, chimney structure ,condition of appliances. Sometimes families get gas appliances capped off as they were worried about...

Sorry just read your first post about Aqualisa .Screwfix sell these shower heads and are very good at taking things back ,if you get my drift .

Contact Aqualisa and ask if they can send you a spare as yous is missing . Or return it to the shop where purchased .

It shows you on u tube how to fit it . I think its called a shower head spacer . You need to take off the isolation valve and extend pipe out .

Possibly when there was scaffolding up for maintenance ?. * Is it a private group or can anyone join ,asking for a friend .