Search results

Can you not take out the screw ? to see if pressure drops more .

https://www.screwfix.com/p/bristan-bar-valve-wall-mount-11-fixing-kit-chrome/58495 Something like this ,ask your plumber what he uses .

The 'threaded parts ' come with the shower and will be a nightmare to use .Best to get a shower plate fixing which will bring the pipes out at correct width . Pipework can then be capped and tested before the wall goes up. Sure your plumber knows .

Overlap them with Denzel tape . Don't cover with concrete unless covered as it will eat into the copper (reason the last person used plaster ). Tiles should be fine .

Sorry that link is not working ,just google tap base ring .

Agree with Blue Loo the tap hole is too big . Did it not come with something like this ? https://www.manomano.co.uk/p/kitchen-faucet-base-ring-gasket-under-tap-washer-rosette-chromed

Hi ,do you not only use the stabilising part on steel sinks ?.

Or get a bar shower wall plate ,which will keep your pipe centers .

Yes call him back ,also check the boilers filling loop has he left it on ,sounds like it keeps filling and the boiler PRV is opening causing the water to come out of the pipe .

On the toilet seat leaver out the 'pegs' and the chrome cap will come off reviling the screw tops .

Yes its a strap on Boss but yours looks like a push in type . The Boss attached to the soil pipe has a rubber washer in the lip to seal it ,if the pipe is put in at an angle it will drip ,might be best to have two 45 Degree bends just before the boss so pipe work has no stress on it . Best take...

Go onto the Shower Doctor website . They can identify it from your pictures .

Don't think plastic pipe should be used for continues flow hot water, except for loops to tap. Lots of other threads on here about this ,

Long hand saw would do it .

Have you checked your wall for hidden pipes ,could be a lead pipe buried in wall with a pin hole leak .

Are you sure that's packing material and not insulation board to protect front panel .Would check with manufactures before putting on .

Why not offer the hedges on Free cycle ,I'm sure someone would think they are worthwhile to come and dig out for you !.

Mirror screw type top ?.

They look like from the top fittings 'wing nut' is like a toggle fitting that goes in from the top of toilet and tightens up into hole, usually used in back to the wall toilets. Take off the seat and the fittings cover and you should have access to screw head .

muggles ///One of the most helpful posts Ive ever seen on DIY not . Thanks