Search results

Do you have an automatic bypass before the motorised valves back to the boiler return ?.

Could be an air lock . If you have a mixer tap in kitchen you could force mains pressure cold back up to cylinder ,hold towel against spout tightly , open hot tap then open cold tap to allow water to flow back ,if you check airlocks on this forum there are other ways mentioned .

Straight away ,grease doesn't set like silicon .

Does the lead flashing under the toilet window overlap the tile much .It doesn't look long enough but could just be photos?. Should be like this so rain cant get blown back .

Is that a it a square hole in the insert . Looks like a 1/2 inch male iron plug. So gas could be live .

Best to mention it asap. Save him money if plans amended at the start . Plus as your chatting to him now without saying anything would look bad if you complain at a later date.

https://www.screwfix.com/p/swirl-bathroom-basin-contract-tap-reviver-kit/12204 Something like this .

Morning , I've just fitted a new kitchen . Wren wanted £16k and that was self fit except for tops. Also they would did not do a thin tall cupboard and wanted me to cut down two £300 units . I hate the hard sell and 'Oh that appliance is free today ! ' Ended up with DIY kitchens, there planning...

Well shorn,not bad you've made 5 pages ! any luck ?

Its like who wants to be a Millionaire 50/50 and your right answer has gone . I would take the hot mixer tap off ( after shutting water off) and see if valve/cartridge is working correctly . If all other hot taps are working it should be the tap ,as your supply dosent know where it is going .

If the mixer is stopping the hot water flowing then there will be no call for hot water from tank so pipe will go cold . Can you run shower and bath tap at same time ? If so is tap water hot ?.

Is it a mixer or thermostatic tap I would be looking at tap before changing heat store.

Is it only one tap in the house that goes cold ?.

What about a short Boss pipe fitting or a soil pipe manifold Screwfix 40832.

If the screws are rusty ,that's probably where the leak was from . Kit for close coupled toilets . https://www.screwfix.com/p/euroflo-close-coupling-cistern-bolts/48787

Glad you got it sorted .

You need to push up the chrome cover from the bottom .Use a bit of wood to lever it up .

https://www.red-current.com/thermal-imaging-camera-hire/flir-e5-hire Theres a few videos on here and you can always ring for advice . I have no connection with this company before anyone jumps in !.

Hi ,you could hire a thermal imaging camera from about £80 a day .Theirs lots of companies out there ,used them before for tracing UFH leaks . Good luck .

Depending on what Kw stove your getting I've seen glass hearths that don't need a concrete base . There website is stoveworlduk.co.uk .