Search results

Thank you, this is most helpful i set it at 700mm just now seamed a bit high, will adjust accordingly Cheers Mini1961

Sorry to be dumb is rim the flat top, Cheers

Hi all, Starting to fit our bathroom and was wondering what height the bath should be, putting my own front panel on so not an issue there, Thanks in advance Mini1961

Thanks will take a look, Cheers

Hi folks Im trying to find out whats the best Insulated beam and block system for my parents house, There building in the highlands and the builders have not used any type of this up here so can any one help, Thanks Mini1961

Hi all am i right in thinking that you have to install a duel rcd consumer unit on new 17th edition for a new build, Cheers Daren

Hi all do i have to still use scrim if i want to use multi finish over my tappered edge joints, Thanks Mini1961

Thanks Steve

Hi all should i use a ip rated socket if i put a socket in the loft, It is going to be feed though the ring and fitted up about 2ft up wall and cables clipped, Thanks Mini1961

Thanks All It sounds like it may be easier to drop the supply to the switch and loop back out to the circuit then it would be easier to use a Dp non fused fcu with neon, Does this sound better. Thanks Mini1961

Hi Guys In my hall way i have put the light switch for the loft lights next to the hall's intermiadiate switch, is there a switch that has a neon in it to distinguish if the loft lights have been left on and to distinguish between the two switches, Thanks in advance

Hi folks, Trying to work out how this works, 7 metre hallway, 2 ceiling roses, 3 switches 2 at either end two wat and one in middle intermidiate , the roses will be loop in out, so on the first two way switch i have taken a drop for a switch, have looped 3+E from this into intremidiate then...

Thanks for your replys guys, so if i am right in thinking i can just come off a ceiling rose as i am using loop in out fittings up to my loft fittings (use the loop in out) then down to a switch, i had worked out that my lighting ring 1200 watt load using 100 watt lamps on the circuit what you...

Hi all whats the best way to wire loft lights, want to have a switch on wall under the loft ladder, at the moment i have not put any cables in for them so what ever you think the best method is, i,e, from lighting circuit or ring, + what is the most lights i can install if i were to say come off...

Thanks gasguru I thought i should do that, i have the foil tape ready was just checking, that it was the right thing to do, as they are in between a small stud wall, Cheers Mini1961

That's very blunt, i guess Just install then, Thanks Mini1961

Hi all going in install a couple of rads in 100mm stud walls, should i cover the plastic pipe with any thing so it can be indentified with a detector, Thanks Mini1961

Thank you Brickie will get some and give it a go, Cheers Mini1961

Hi all can some one advise me on the best way to remove bits of cement of my windows and doors, Thanks

The brick layer put them in due to the timber frame needing ventilation in the cavity, but he never put any cavity tray above the lintels, the vents are spaced @ 600 all the way around the eves and base, Cheers Mini1961