Search results

I am going to apply the zinc phosphate then undercoat then 2 coats of gloss. I want to do it right so the gates look well when finished. Can you advise what products to buy and would 2.5 ltrs do for each of the three products?

Had a look at primers and undercoat paint in B&Q but the hammerite paint I got says it includes primer and undercoat and there is no need for them

Should have took pics from start to finish but will post one when gates are completed. So basically wash gates down with soap, sugar and water then dry off, apply a zinc undercoat and finish with two coats of black gloss and two coats of gold in the detail?

I have just reserved this product in B&Q Dulux Weathershield Paint Exterior Gloss Black 2.5L, is this ok to use?

The gates are dry at the moment I applied the nitromors a few weeks ago do I still need to neutralise the gates? If so do I just mix soap and water? Also can you recommend a primer, undercoat and black and gold gloss products. My gates are approx 6 ft wide each and start from 4ft and rise to...

My dad got me a set of drive gates which I got extended to fit the entrance to my house. I have spent a few hours using nitromors and a heat gun stripping several layers of paint of them. I am at the point of painting them and hope to apply hammerite direct to rust black paint with hammerite...

Thanks for all replies. Had a spark look at it and yes he said it was a mess not the worst he had seen but a mess. We got a neutral as the outside lights could not work without a neutral!! The original so called spark had left a twin brown cable with a brown cable not connected to...

where can i get this from? i will probably have to gt spark to do it then

That is from the cable which is going outside to my lights!

this is my PIR which i have purchased

this is a pic of the inside of my switch, you can see the black cable to the left hand side which is going outside for the external lights!

i thought there was sorry

no blue all brown and earth!

Withint the switch yes

The switch controls my hall, landing and outside porch lights. 2 of the switches are 2 way there are blue, brown and earth wiring within the switch.

Sorry the cable is coming from a 6 gang switch which i bought today in my hall (not connected yet)!!

Hi I have recently bought 2 Tall 3 headed lights out of B&Q for my drive. I have a cable from the socket inside the house (not connected) behind a 4 gang switch which are all being used. I have been searching for a 5 gang switch but very hard to find although I could use a 6 gang which...