Search results

if it does have chilton on it just bin it , every chilton item ive had from cef has broken within a month

i got them from ebay from a japanese seller , about eight quid each and they give off a white light . the ones ive tried from uk sellers have had a bluish light .

i got some tile drills from ebay for a quid and they work great . ps .dont use hammer action

ive just read your post again was it the pull cord box or shower that was getting hot ???

sounds like you have a loose connection, the cable between shower and pull switch will need replacing and proberly a new shower unit.

i also have a tt system in a rural farm . do you know what kind of heating your neighbour has ?? or does he/ she have an appliance that comes on through the night . my neighbour complains that his lights dip when my heating kicks in .

each lamp has 48 led's in it .

ive got 48 led gu10's in my kitchen . they give off a white light and are nearly as bright as 50w halogens they replaced, beam width a bit narrower .

i have the same problem when my boiler kick in , had scottish power out to check and wanted £5000 to upgrade supply from transformer ,100m away max. i now use cfu's and led lighting and lighting works fine now and saves a few quid

the two breaker's above the one ryan pointed out. they look like they are 32A

it's not the only 32A mcb with a 2.5mm single cable the 2 on left hand side in middle look like they are 32A breakers

another great photo, where do you get them ??? :lol: :lol:

ive a danfoss unit in an old cottage with solid stone wall and ive had no problems

have to admit that's the neatest board ive sean cable numbers are anice touch.

another neat board but why the white insulating tape with question mark on it ??

we only use merin boards at work , i try to keep boards the same ,saves keeping a large stock of spare breakers. ive already changed all sockets,light switches and light fittings in house to mk range

present board is a split load board ad im replacing it with a split load board with more ways , previous owner has wired immersion to ring main so i will have to run new cable . im doing all work myself , im a fully qualified industrial electrician so thats why im asking about which boards are...

very neat wiring in the last boards , go for merin gerlin isobar boards thats all i use

there's an seperate isolalor berween meter and consumer unit

im going to replace my consumer unit , my present one has developed a slight buzzing from main isolater breaker and im looking for one with more ways . are there any makes to avoid and whats a good make??? any help appriciated