Search results

Hi all I've been looking for ages online for a double kitchen sink with a wide lip sized 95 x 51cm sinks the cut is 92 x 49cm. Or something that would work. This is our current one. If anyone can help with any links I would be most appreciative.

I wanted to buy a new sink but can't find any 95 x 51cm sinks the cut is 92 x 49cm Just been to B and Q and there's none. I also wanted one with a wider lip than the one I have too. If anyone has any links I would be most grateful thanks

Thanks and I just paint it on the exposed chipboard (wood).

Thanks Would this Wood glue do the job? Any other links most appreciated. Thanks https://www.screwfix.com/p/no-nonsense-wood-adhesive-250ml/852kh

Thanks all. Yes I think I will take the advice most have suggested Can I ask where should I seal it or bead it some mentioned? Is beading it the same as putting silicone on it? Where should the silicone go? I'm sure I read to put in two different places?.ie ontop and underneath? What's a goog...

The top left corner of sink lip is slightly raised above worktop which allows the water to come through. But why is this? I press down on it but it pops back up? Everywhere else is tight

Could I buy a new sink with wider lips and get that fitted?

Hi all We got an electrical rewire and they have left thr holes where old spot lights were. So we want to see if there are any fake non electrical spot lights like you see on side of road we can pop in? Just looks ugly if we leave how it is.

You mean just to get a new sink rather than the whole work top? Sinks don't come attached to the worktop do they? You have to seal them in?

Thanks. Is it possible to replace just the worktop where the sink is? Not the other part where the stove is? Just that we have yet to move in and the place is full of dust etc due to a rewire so if we replace the worktop this would be the best time really. What do you think the cost would be...

Thank you. I'm really nervous. Not sure if to go ahead with it or not. Worried somehow I may end up being charged with something.

Thanks even the 10 pence size hole in corner?

Thanks. I don't mind how bad it looks so long as totally water tight and no water can seep though?

Thanks just there's a big hole in corner, how do I seal it? It's the size of a 10 p coin where the woods rotten.

A proper flush mount sink? Is this better than a regular one? I really want one I don't have to worry about leaking around silicon area again?

Thanks. There's a good 10 pence size hole in that corner, not sure if silicon would fill that in. Maybe some kind of filler. Who would I have to contact to maybe come out and look at it and tell me the best work top and measure it etc?

Could I just get a work top going up to cupboard and leave the one the gas cooker is attached too? As wood is totally rotten.

Wood is totally rotten where the waters got on it for years. So what to do about the wood. Have to buy a new work top.?

Take sink out, remove old silicone, clean it all up, make it dry and then put new silicon in?

Thanks. You mean to take out the metal sink area? When you say clean it up, what do you mean? What about if I just put silicon around it as it is?