Search results

If the hole has been cut, the hole has been cut.

It trips the breaker at the main board. I have a few rooms that have downlighters in them. Whenever one of the lamps go it trips the breaker thus putting all the other lights out until its reset. Is this normal occurrence?

Cheers. Thats pushing the limits of my knowledge so I'll leave it there :) I was as much interested for myself as for knowing what'll happening on site when I find someone capable of installing it. I saw a few of the packs for sale. A bit more complicated than I thought it would be but...

Balenza, thanks for that. Its not my house. We are the main contractor and will be subcontracting the heating work out. Area's in question are 2 seperate rooms ( 12sqM approx in each) If it was timed (it more than likely will be) how would it be possible for the UF heating to come on at...

Anyone?

Does the quote include the rodding eye? If so and the chap wants to do all that for £480 tell him to carry right on. Seems very reasonable. Rodding eyes allow for easier access should the stack become 'clogged' :twisted: On a seperate note PVC looks awful IMO

Hi folks, Working on site just now the spec for heating in the Extension is underfloor heating. Does anyone have any info on what effect adding underfloor heating has on the existing boiler. ie is a certain sq m of underfloor heating equivilant to adding X amount of radiators? We have had...

Mines does similar but only because the Cold Inlet Valve isn't fully open

Excuse my ignorance lads but is this a statutory document? If so why does it cost money?

I'll give it a go mate, cheers. I can isolate the hot water at the kitchen tap and swap the flexi's onto a new tap. And yes the shower is the bath/shower mixer tap (i've tried it on both modes). I hope thats not the problem as its boxed and tiles under the bath :lol:

Thanks for the comments. Agile, yes I can do that and I will try it when I'm next at the flat. Blasphemus, yes the heating works perfectly well. The boiler came as part of a package of boiler, 7 rads, trvs etc for a set price. Not the greatest boiler I know but I thought it would be...

Definately yes, snap it up. Excellent insulation values

Turned off the cold supply to the shower today and ran it purely on the DHW from the boiler (boiler is fed from a different cold supply) and it made zero difference.

Potentially I have a similar problem. HW is piped from the boiler in 15mm copper. Is that too small a pipe for a decent flow rate?

Yes mate its up full

Anyone :?

Anyone know what temp the boiler is meant to put out? Meant to be moving in next week :o

Got some instructions for the shower today. It needs 60c but the boiler is only putting out 40c at best :?

:wink:

I heard from a third party that Scottish Gas won't offer their boiler care package to systems with Plastic pipes fitted. Not sure if its true or not