Search results

  1. A

    Radiators work.....but not hot water?

    Hi,, just noticed I have no hot water but the central heating works so heats water up? but I have no hot running water any ideas?? thanks in advance ALso looked in my airing cuboard and the controls are on and working.
  2. A

    mountfield laser made by tecumseh

    just found some numbers on the engine 28000056 8/2 fasa model and serie number 85323 001720 hope this helps a bit thanks
  3. A

    mountfield laser made by tecumseh

    hi wonder if anybody could help i need a whole new top or recoil for a mountfield laser made by tecumseh just wondering where i could get a part from?? pic is attached cheers
  4. A

    Mountfield rv45 150cc not starting

    yeah done that its going for repair on saturday but it will take 2 weeks the man said and its under warranty so no cost just wanted to give a ago myself. thanks for all the help and i will post back when i get the mower back and tell you what the repair man said thanks
  5. A

    Mountfield rv45 150cc not starting

    took the carb off gave it a good clean still the same only starts when i spray carb cleaner in there??
  6. A

    Mountfield rv45 150cc not starting

    Ok give it ago tomorrow and get back to you
  7. A

    Mountfield rv45 150cc not starting

    hi took the carb off then the float gave it a good clean with carb cleaner and jets put it back on and still no joy only starts up when i spray carb cleaner in there for 1-2 secs Any more ideas thanks
  8. A

    Mountfield rv45 150cc not starting

    Ok I'll give it a go and let you know
  9. A

    Mountfield rv45 150cc not starting

    Hi I wonder if anybody can point me in the right direction I have a Mountfield lawnmower rv45 150cc and it does not want to run I have Checked the spark plug and it works and the strange thing is if I spray carb cleaner into the carb it starts up for 1-2 secs and then dies. Is there...
  10. A

    Baxi wm 70/4 boiler service HOW TO

    Gotcha thanks for that but I did get a new gasket before I put the fan back on so the seal should be fine, thanks for clarifying and after all the advice I will not be touching the combustion chamber
  11. A

    Baxi wm 70/4 boiler service HOW TO

    Sorry forgot to say I regreased the bearings after cleaning so hopefully a new fan is not inevitable cheers
  12. A

    Baxi wm 70/4 boiler service HOW TO

    Ok with your advice I will stay away, there is nothing wrong with the boiler after the fan was fixed I just thought I would give it a good clean if need be but working perfect at the moment so I will stay away on your advice thanks for the help I will put the outer cover back on cheers
  13. A

    Baxi wm 70/4 boiler service HOW TO

    The fan had nothing to do with gas it was just disassemble and reassemble as it stopped working easy thing to do, but if your saying opening the front interferes with the gas then I will stay away!
  14. A

    Baxi wm 70/4 boiler service HOW TO

    Hi don't want to touch the gas I will isolate the electric and gas I just want to give it a good clean if need be??
  15. A

    Baxi wm 70/4 boiler service HOW TO

    Hi my fan went on my baxi boiler wm 70/4 so it would not ignite the gas as the fan was broke, so I took the fan out and had a look and as I manually turned the fan myself I noticed a little bit of resistance in turning so I gave the bearings a good blow out or clean then sprayed with WD 40 into...
  16. A

    kinetico water softner overflowing

    hi i have kinetico compakwater softner under the kitchen sink overflowing from the waste pipe it has a slow dripping from the outside overflow pipe and when i look inside the water softner its quite full and just reaching the overflow pipe, is there anyway of correcting this. thanks in...
  17. A

    high pressure mixer tap slow running hot water

    thanks for the simple answer
  18. A

    high pressure mixer tap slow running hot water

    hi, wonder if anybody can help i think i have a high pressure mixer tap but my hot water is standard gravity not off the mains so it runs really slow in my kitchen is there anything i could do to modify the tap to make it standard gravity thanks inadvance
Back
Top