Search results

Enable Beam Pair attribute on Zone settings for the two devices you want, best solution would be to find what's causing the alarms however.

where's keyswitch monitor?

Will do thanks.

Running cables into the Lounge isn't something I wanted to do (last resort as it was decorated a few years prior) but if worst comes to worst then will do, I will try out the outputs thing tmr and consider my options moving from here, at the moment we have the zone omitted and are setting the...

Fair point on the Lounge tbf I could add some more contacts on the window in theory as that's about the only thing I haven't done other than shocks and by doing so would make the PIR 100% redundant, I have 8 core cable (meant to order 6 core but it is what it is) with 4 in use on the hall PIR...

I'm going to mess around with outputs as running a wired PIR into that room is very difficult without getting another Ricochet one which seems daft since its a small room anyway, I use multi-knock so footballs don't set off my shock sensors but didn't try them on PIRs because as you said I have...

I have one left, others in use

The PIRs Beam Paired are in separate rooms and at night the cats are confined to just one room that has a beam pair but are not during the day (that's the issue) sadly it is not financially viable to put shocks and contacts on each window and not have PIRs otherwise I would but still the...

Thank you for the reply, I replaced one of the problem PIRs which caused an alarm with a much better Pyronix KX10DP in a slightly better location that isn't wireless and seems to have better pet immunity and I have swapped around the Beam Pairs as the other PIR moved but still have it turned on...

You may recognise me from a different thread about the Texecom Connect app which is now fixed but I want some advice, this isn't a massive problem but something I would like some opinions on, without going into too much detail to reduce false alarms I have two PIRs (wireless Texecom Capture...

No worries

This is off-topic but I thought I may as well post it here rather than start another thread, I have a Zone programming dilemma so long story short I have two cats which sometimes bypass my Pet-Friendly Capture PIRs as they jump on things and no it is not possible to confine them to an...

I've since added all the users to the app and it works fine

It was the to do with the way I set up Texecom cloud. Just have some other issues with the system to fix and it should be up and running (thanks everyone for the help)

Ah I see, thanks for the reply. The issue has since however been resolved :)

No sadly, sorry for the late reply. Everything else works until you get to where it asks for the panel code.

I have a cloud account and I don't know how to check the app version, I have downloaded it literally a few days ago and reinstalled today so I assume its the most recent?? When I signed up for the Texe cloud I just put zeros in the company vat number, etc (I saw on another thread people saying...

Thanks for the reply.... A few days ago I changed both the master (user 1) and engineer code for security reasons and so I can more easily remember them and both do not work, its worth noting these were changed before Smartcom was setup. I was told I needed the eng code but tried both anyway, I...

Just tried this (mine has been changed from 5678) sadly still gives the same error :(

I have recently aqquired a Texecom Premier Elite alarm system for my house and I have installed it myself and so far its been ok as someone who has done lots of research, carefully read manuals and has an interest in alarms (please note this is a self install/DIY system) I also have a Texecom...