Search results

took the connections out and redid them. looks like out of the box thinking on this one.

thanks again, not shining on anyone,but a 60w bulb is hardly going to blind anyone, i would assume the 2 sparks checked voltage,but why would the voltage be any different from the kitchen lighting from where it's taken,and there dos'nt seem to be a problem with the kitchen lights

it's not my light,it's an old bloke who's a neighbour,i said i would ask on here as they seem to have run out of ideas. 1/ two sparks because the first one got fed up of replacing bulbs so gave up, second one came to replace bulb,that failed,then changed lamp fittings, cables and switch,but...

any ideas for this problem,an outside light was fitted by electrician,taken from the kitchen light down to a switch then out to a standard 500w halogen security light without pir. it kept blowing the bulb,the electrician gave up. another spark fitted a new bulb,this one later burned out the...

thanks,

thanks coljack,if it's the timer then what happens with the central heating thermostat built into the boiler?

thanks flameport,will that mean that the signal will go through the external thermostat then the internal thermostat. how would that work? why dos'nt fig 39 which is supposed to be wiring for external theromostat show it that way? sorry not doubting your advice,just trying to understand it.

anyone?

sorry but another question,when i have looked at the boiler connections,there are two wires already in the connections, which i assume are from the boilers thermostat, do i just disconnect these two wires and connect the wires from the external thermostat. as you can see in figure 38,which are...

does these work

sorry thought i had added diagrams,trying to work out how to do it. and sods law internet keeps going off

want to double check that i am going to connect thermostat to boiler correctly. the thermostat is voltage free,in the boiler diagram it shows a voltage free thermostat,but it has a live and neutral,my thermostat diagram only shows L. my thermostat is not going to any time clock,just direct to...

thought i had checked that,so pulled pipe off outside and water gushed out,looks like its now working ,thank you.

problem with my mothers boiler no water or heating.it fires up but after a minute or two it shuts down and shows a fault code L then F.what parts could be at fault,and whats the best test sequence. thanks

thanks again,but that was my original question,i know they would not be up to current reg,s but can the 4mm be left in place if the consumer unit has been renewed and the tails and main earth have been upped to 25mm/16mm garymo,could you please explain what difference would it make on the...